1-Bit To 2-Bit Address Driver With 3-State Outputs

This 1-bit to 2-bit address driver is designed for 2.3-V to 3.6-V VCC operation.
Diodes to VCC have been added on the inputs to clamp overshoot.
Active bus-hold circuitry holds unused or undriven inputs at a valid Logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.
The outputs, which are designed to sink up to 12 mA, include equivalent 26- series resistors to reduce overshoot and undershoot.
To ensure the high-impedance state during power up or power down, the output-enable (OE) input should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
SN74ALVCHS162830DBBR Texas Instruments 1-Bit to 2-Bit Address Driver With 3-State Outputs 80-TSSOP -40 to 85
SN74ALVCHS162830GR Texas Instruments 1-Bit to 2-Bit Address Driver With 3-State Outputs 80-TSSOP -40 to 85
SN74ALVCHS162830 's PackagesSN74ALVCHS162830 's pdf datasheet

SN74ALVCHS162830 Pinout, Pinouts
SN74ALVCHS162830 pinout,Pin out
This is one package pinout of SN74ALVCHS162830,If you need more pinouts please download SN74ALVCHS162830's pdf datasheet.

SN74ALVCHS162830 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN74ALVCHS162830 Pb-Free SN74ALVCHS162830 Cross Reference SN74ALVCHS162830 Schematic SN74ALVCHS162830 Distributor
SN74ALVCHS162830 Application Notes SN74ALVCHS162830 RoHS SN74ALVCHS162830 Circuits SN74ALVCHS162830 footprint