These devices SN74AS651 consist of bus-transceiver circuits, D-type Flip-Flops and control circuitry arranged for multiplexed transmission of data directly from the data bus or from the internal storage Registers Output-enable (OEAB and OEBA) inputs are provided to control the transceiver functions. Select-control (SAB and SBA) inputs are provided to select real-time or stored data transfer. The circuitry used for select control eliminates the typical decoding glitch that occurs in a multiplexer during the transition between stored and real-time data. A low input level selects real-time data, and a high input level selects stored data. Figure 1 illustrates the four fundamental bus-management functions that CAN be performed with the octal bus transceivers and Registers Data on the A or B data bus, or both, CAN be stored in the internal D-type Flip-Flops by low-to-high transitions at the appropriate Clock (CLKAB or CLKBA) terminals, regardless of the select- or output-control terminals. When SAB and SBA are in the real-time transfer mode, it is possible to store data without using the internal D-type Flip-Flops by simultaneously enabling OEAB and OEBA. In this configuration, each output reinforces its input. When all other data sources to the two sets of bus lines are at high impedance, each set of bus lines remains at its last state. By Texas Instruments
SN74AS651 's PackagesSN74AS651 's pdf datasheet

SN74AS651 Pinout, Pinouts
SN74AS651 pinout,Pin out
This is one package pinout of SN74AS651,If you need more pinouts please download SN74AS651's pdf datasheet.

SN74AS651 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN74AS651 Pb-Free SN74AS651 Cross Reference SN74AS651 Schematic SN74AS651 Distributor
SN74AS651 Application Notes SN74AS651 RoHS SN74AS651 Circuits SN74AS651 footprint