Quadruple Bus Buffer Gate With 3-State Outputs

This quadruple bus Buffer Gate is designed for 0.8-V to 2.7-V VCC operation, but is designed specifically for 1.6-V to 1.95-V VCC operation.
The SN74AUC126 contains four independent Line Drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is low.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
SN74AUC126RGYRG4 Texas Instruments AUC SERIES, QUAD 1-BIT DRIVER, TRUE OUTPUT, PQCC14, GREEN, PLASTIC, MO-241BA, QFN-14
SN74AUC126RGYR Texas Instruments Quadruple Bus Buffer Gate with 3-State Outputs 14-VQFN -40 to 85
SN74AUC126 's PackagesSN74AUC126 's pdf datasheet
SN74AUC126RGYR QFN
SN74AUC126RGYRG4 QFN




SN74AUC126 Pinout, Pinouts
SN74AUC126 pinout,Pin out
This is one package pinout of SN74AUC126,If you need more pinouts please download SN74AUC126's pdf datasheet.

SN74AUC126 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN74AUC126 Pb-Free SN74AUC126 Cross Reference SN74AUC126 Schematic SN74AUC126 Distributor
SN74AUC126 Application Notes SN74AUC126 RoHS SN74AUC126 Circuits SN74AUC126 footprint
Hot categories