10-Bit FET Bus Switches With Level Shifting With -2 V Undershoot
The SN74CBTD3384C is a high-speed TTL-compatible FET bus Switch with low ON-state resistance, allowing for minimal propagation delay. This device features an integrated Diode to VCC to provide level shifting for 5-V input down to 3.3-V output levels. Active Undershoot-Protection Circuitry on the A and B ports of the SN74CBTD3384C provides protection for undershoot down to ?2 V by sensing an undershoot event and ensuring that the Switch remains in the proper state.
The SN74CBTD3384C is organized as two 5-bit Bus Switches with separate output-enable (OE) inputs. It CAN be used as two 5-bit Bus Switches or as one 10-bit bus Switch When OE is low, the associated 5-bit bus Switch is ON, and port A is connected to port B. When OE is high, the associated 5-bit bus Switch is OFF, and a high-impedance state exists between the A and B ports. This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
By Texas Instruments
|SN74CBTD3384C Pb-Free||SN74CBTD3384C Cross Reference||SN74CBTD3384C Schematic||SN74CBTD3384C Distributor|
|SN74CBTD3384C Application Notes||SN74CBTD3384C RoHS||SN74CBTD3384C Circuits||SN74CBTD3384C footprint|