The SN75126 quadruple Line Driver is designed to meet the IBM 360/370 I/O specification A22-6974-3. The output voltage is 3.11 V minimum (at IOH = 59.3 mA) over the recommended ranges of supply voltage (4.5 V to 5.95 V) and temperature. Driver outputs use a fault-detection current-limit circuit to allow high drive current but still minimize power dissipation when the output is shorted to ground. The SN75126 is compatible with standard TTL Logic and supply voltages. Fault-flag circuitry is designed to sense and signal a line short on any Y line. Upon detecting an output fault condition, the fault-flag circuit forces the driver output into a low state and signals a fault condition by causing the fault-flag output to go low. The SN75126 CAN drive a 50- load or a 90- load as used in many I/O systems. Optimum performance CAN be achieved when the device is used with either the SN75128 or SN75129 line receivers. Also, see the SN751730 for new 360/370 Interface designs. The SN75126 is characterized for operation from 0C to 70C. By Texas Instruments
SN75126 's PackagesSN75126 's pdf datasheet

SN75126 Pinout, Pinouts
SN75126 pinout,Pin out
This is one package pinout of SN75126,If you need more pinouts please download SN75126's pdf datasheet.

SN75126 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN75126 Pb-Free SN75126 Cross Reference SN75126 Schematic SN75126 Distributor
SN75126 Application Notes SN75126 RoHS SN75126 Circuits SN75126 footprint
Hot categories