QUADRUPLE LINE DRIVER

The SN75ALS126 quadruple Line Driver is designed to meet the IBM 360/370 I/O specification GA22-6974-3. The output voltage is 3.11 V minimum (at IOH = 59.3 mA) over the recommended ranges of supply voltage (4.5 V to 5.95 V) and temperature. Driver outputs use a fault-detection current-limit circuit to allow high drive current but still minimize power dissipation when the output is shorted to ground. The SN75ALS126 is compatible with standard TTL Logic and supply voltages. The SN75ALS126 employs the IMPACT process to achieve fast switching speeds and low power dissipation. Fault-flag circuitry is designed to sense and signal a line short on any Y line. Upon detecting an output fault condition, the fault-flag circuit forces the driver output into a low state and signals a fault condition by causing the fault-flag output to go low. The SN75ALS126 CAN drive a 50- load as required in the IBM GA22-6974-3 specification or a 90- load as used in many I/O systems. Optimum performance CAN be achieved when the device is used with either the SN75127, SN75128, or SN75129 line receivers. The SN75ALS126 is characterized for operation from 0C to 70C. By Texas Instruments
SN75ALS126 's PackagesSN75ALS126 's pdf datasheet



SN75ALS126 Pinout, Pinouts
SN75ALS126 pinout,Pin out
This is one package pinout of SN75ALS126,If you need more pinouts please download SN75ALS126's pdf datasheet.

SN75ALS126 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SN75ALS126 Pb-Free SN75ALS126 Cross Reference SN75ALS126 Schematic SN75ALS126 Distributor
SN75ALS126 Application Notes SN75ALS126 RoHS SN75ALS126 Circuits SN75ALS126 footprint
Hot categories