Low-Power Differential Line Driver And Receiver Pair
The SN65LBC180 and SN75LBC180 differential driver and receiver pairs are monolithic integrated circuits designed for bidirectional data Communication over long cables that take on the characteristics of transmission lines. They are balanced, or differential, voltage mode devices that meet or exceed the requirements of industry standards ANSI RS-485 and ISO 8482:1987(E). Both devices are designed using TI's proprietary LinBiCMOS? with the low-power consumption of CMOS and the precision and robustness of Bipolar Transistors in the same circuit.
Both the SN65LBC180 and SN75LBC180 combine a differential Line Driver and receiver with 3-state outputs and operate from a single 5-V supply. The driver and receiver have active-high and active-low enables, respectively, which CAN be externally connected to function as a direction control. The driver differential outputs and the receiver differential inputs are connected to separate terminals for full-duplex operation and are designed to present minimum loading to the bus whether disabled or powered off (VCC = 0). These parts feature a wide common-mode voltage range making them suitable for point-to-point or multipoint data-bus applications.
The devices also provide positive and negative output-current limiting and thermal shutdown for protection from line fault conditions. The Line Driver shuts down at a junction temperature of approximately 172C.
The SN65LBC180 and SN75LBC180 are available in the 14-pin dual-in-line and small-outline packages. The SN75LBC180 is characterized for operation over the commercial temperature range of 0C to 70C. The SN65LBC180 is characterized over the industrial temperature range of -40C to 85C.
By Texas Instruments
|SN75LBC180DG4||Texas Instruments||Low-Power Differential Line Driver And Receiver Pair 14-SOIC 0 to 70|
|SN75LBC180RSAT||Texas Instruments||Low-Power Differential Line Driver And Receiver Pair 16-QFN 0 to 70|
|SN75LBC180RGVRG4||Texas Instruments||LINE TRANSCEIVER, PQCC16, GREEN, PLASTIC, QFN-16|
|SN75LBC180RSAR||Texas Instruments||IC LINE TRANSCEIVER, PQCC16, GREEN, PLASTIC, QFN-16, Line Driver or Receiver|
|SN75LBC180AP||Texas Instruments||LINE TRANSCEIVER, PDIP14, PLASTIC, DIP-14|
|SN75LBC180RGVTG4||Texas Instruments||IC LINE TRANSCEIVER, PQCC16, GREEN, PLASTIC, QFN-16, Line Driver or Receiver|
|SN75LBC180RGVT||Texas Instruments||LINE TRANSCEIVER, PQCC16, GREEN, PLASTIC, QFN-16|
|SN75LBC180NE4||Texas Instruments||Low-Power Differential Line Driver And Receiver Pair 14-PDIP 0 to 70|
|SN75LBC180N||Texas Instruments||Low-Power Differential Line Driver And Receiver Pair 14-PDIP 0 to 70|
|SN75LBC180D||Texas Instruments||Low-Power Differential Line Driver And Receiver Pair 14-SOIC 0 to 70|
|SN75LBC180 Pb-Free||SN75LBC180 Cross Reference||SN75LBC180 Schematic||SN75LBC180 Distributor|
|SN75LBC180 Application Notes||SN75LBC180 RoHS||SN75LBC180 Circuits||SN75LBC180 footprint|