HIGH-SPEED DIFFERENTIAL LINE DRIVERSThe SN75LVDS32 and SN75LVDS9637 are
differential line receivers that implement the
electrical characteristics of low-voltage differential
signaling (LVDS). This signaling technique lowers
the output voltage levels of 5-V differential
standard levels (such as EIA/TIA-422B) to reduce
the power, increase the switching speeds, and
allow operation with a 3.3-V supply rail. Any of the four differential receivers provides a valid logical output state
with a 100 mV allow operation with a differential input voltage within the input common-mode voltage range.
The input common-mode voltage range allows 1 V of ground potential difference between two LVDs nodes.
The intended application of these devices and signaling technique is both point-to-point and multidrop (one
driver and multiple receivers) data transmission over controlled impedance media of approximately 100 . The
transmission media may be printed-circuit board traces, Backplanes or cables. The ultimate rate and distance
of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the
environment.
The SN75LVDS32 and SN75LVDS9637 are characterized for operation from 0C to 70C. By Texas Instruments
|
Part | Manufacturer | Description | Datasheet | Samples | |
---|---|---|---|---|---|
SN75LVDS32DG4 | Texas Instruments | Quad High-Speed Differential Receivers 16-SOIC 0 to 70 | |||
SN75LVDS32D | Texas Instruments | Quad High-Speed Differential Receivers 16-SOIC 0 to 70 | |||
SN75LVDS32DR | Texas Instruments | Quad High-Speed Differential Receivers 16-SOIC 0 to 70 |
|
SN75LVDS32 Pb-Free | SN75LVDS32 Cross Reference | SN75LVDS32 Schematic | SN75LVDS32 Distributor |
SN75LVDS32 Application Notes | SN75LVDS32 RoHS | SN75LVDS32 Circuits | SN75LVDS32 footprint |