OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS

The AC533 devices are octal transparent D-type Latches with 3-state outputs. When the latch-enable (LE) input is high, the Q outputs follow the complements of the data (D) inputs. When LE is taken low, the Q outputs are latched at the inverse Logic levels set up at the D inputs. A buffered output-enable (OE) input CAN be used to place the eight outputs in either a normal Logic state (high or low Logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for Interface or pullup components. OE does not affect the internal operations of the Latches Old data CAN be retained or new data CAN be entered while the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. By Texas Instruments
SNJ54AC533 's PackagesSNJ54AC533 's pdf datasheet
AC533




SNJ54AC533 Pinout, Pinouts
SNJ54AC533 pinout,Pin out
This is one package pinout of SNJ54AC533,If you need more pinouts please download SNJ54AC533's pdf datasheet.

SNJ54AC533 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SNJ54AC533 Pb-Free SNJ54AC533 Cross Reference SNJ54AC533 Schematic SNJ54AC533 Distributor
SNJ54AC533 Application Notes SNJ54AC533 RoHS SNJ54AC533 Circuits SNJ54AC533 footprint
Hot categories