SP6887 -4 Channel Regulated Charge Pump White LED Driver

The SP6887 is a 4-channel Charge Pump White LED Driver capable of driving up to 4 LEDs connected in parallel. The device operates in either 1x mode or 1.5x fractional mode, and it CAN Switch from 1x mode to 1.5x mode automatically when the input voltage decreases. Its internal 4 current sink Regulators ensure both LED current matching and brightness uniformity. The LED current CAN be programmed by an external resistor, RSET, connected between the RSET pin and ground. LED currents of up to 30mA are supported by the input supply voltage over a range of 2.7V to 5.5V, making the device optimized for Li-Ion battery applications. The SP6887 has a fixed switching frequency of 1MHz, allowing the use of very small value ceramic capacitors. The enable input pin allows the device to be placed in shutdown mode while reducing current consumption to less than 1A. LED dimming CAN be done by several methods including using a DC voltage to set the RSET pin current, adding a switched resistor in parallel with RSET or applying a PWM signal to CTRx pin or EN pin. By Exar Corporation
SP6887 's PackagesSP6887 's pdf datasheet
SP6887ER4-L QFN
SP6887ER4-L-TR QFN




SP6887 Pinout, Pinouts
SP6887 pinout,Pin out
This is one package pinout of SP6887,If you need more pinouts please download SP6887's pdf datasheet.

SP6887 Application circuits
SP6887 circuits
This is one application circuit of SP6887,If you need more circuits,please download SP6887's pdf datasheet.


Related Electronics Part Number

Related Keywords:

SP6887 Pb-Free SP6887 Cross Reference SP6887 Schematic SP6887 Distributor
SP6887 Application Notes SP6887 RoHS SP6887 Circuits SP6887 footprint