1260 To 1620 Nm / 3 Gb/s Single Optical SM ReceiverThe SPS-9110V-1RG is a single channel optical single
mode receiver module designed to receive optical serial
digital signals as defined in SMPTE 297-2006. It supports
from 50 Mbps to 3 Gbps and is specifically designed for
received the SMPTE 259M, SMPTE 344M, SMPTE 292M
and SMPTE 424M SDI pathological patterns. It is with the
SFP 20-pin connector to allow hot plug capability. It CAN
receive signal from 50 Mbps to 3 Gbps with up to 30 km of
single-mode fiber when using the SPS-9110V-1TG/2TG as
the transmitter. A maximum distance of 10 km is achievable
with 3Gbps pathological signals. By optoway
|
|
| Part | Manufacturer | Description | Datasheet | Samples | |
|---|---|---|---|---|---|
| ISL68301IRAZ | Renesas Electronics Corporation | $ Unique compensation-free design, which is always stable $ Output voltage range: 0.45V to 5.5V $ Input voltage range: 4.75V to 16V or 4.5V to 5.5V $ 0.5% output voltage accuracy over line, load, and temperature $ ChargeMode control achieves fast transient response, requires minimal output capacitance, and provides output stability without compensation $ Single-channel output, can be paralleled with up to eight devices in a single droop-less current sharing output $ Switching frequency range of 200kHz to 1.0MHz $ Proprietary single-wire DDC serial bus enables voltage sequencing and fault spreading with other Renesas digital power ICs $ Cycle-by-cycle inductor peak current protection $ Configurable fault protection for output voltage UV/OV, input voltage UV/OV, internal and SPS temperature $ Cycle-by-cycle output current measurement with adjustable gain settings for sensing with SPS current monitor or low DCR inductors $ Dedicated telemetry ADC monitors input voltage, input current, output voltage, internal temperature, and power stage temperature $ Nonvolatile memory (NVRAM) stores operating parameters and fault events across POR cycles $ PMBus compliant. Supports 113 PMBus commands $ Compatible with Smart Power Stage (SPS) devices |
|
||
| ZL8802ALAFTK | Renesas Electronics Corporation | $ Unique compensation-free design – always stable $ Output voltage range: 0.54V to 5.5V $ Input voltage range: 4.5V to 14V $ 1% output voltage accuracy over line, load, and temperature $ ChargeMode control achieves fast transient response, reduced output capacitance, and provides output stability without compensation $ 2-channel output, 2-, 4-, 6-, or 8-phase output with two, three, or four devices $ Switching frequency range 200kHz to 1.33MHz $ Proprietary single-wire DDC (Digital-DC) serial bus enables voltage sequencing and fault spreading with other Intersil digital power ICs $ Inductor peak and averaged over and undercurrent protection $ Digital fault protection for output voltage UV/OV, input voltage UV/OV, temperature, and MOSFET driver voltage $ Accurate average output current measurement with adjustable gain settings for sensing with SPS current monitor outputs or high current, low DCR inductors $ Monitor ADC measures input voltage, input current, output voltage, driver voltage, internal and external temperature $ Nonvolatile memory for storing operating parameters and fault events $ PMBus compliant |
|
||
| ZL8802ALAFT7A | Renesas Electronics Corporation | $ Unique compensation-free design – always stable $ Output voltage range: 0.54V to 5.5V $ Input voltage range: 4.5V to 14V $ 1% output voltage accuracy over line, load, and temperature $ ChargeMode control achieves fast transient response, reduced output capacitance, and provides output stability without compensation $ 2-channel output, 2-, 4-, 6-, or 8-phase output with two, three, or four devices $ Switching frequency range 200kHz to 1.33MHz $ Proprietary single-wire DDC (Digital-DC) serial bus enables voltage sequencing and fault spreading with other Intersil digital power ICs $ Inductor peak and averaged over and undercurrent protection $ Digital fault protection for output voltage UV/OV, input voltage UV/OV, temperature, and MOSFET driver voltage $ Accurate average output current measurement with adjustable gain settings for sensing with SPS current monitor outputs or high current, low DCR inductors $ Monitor ADC measures input voltage, input current, output voltage, driver voltage, internal and external temperature $ Nonvolatile memory for storing operating parameters and fault events $ PMBus compliant |
|
||
| ZL8802ALAFT | Renesas Electronics Corporation | $ Unique compensation-free design – always stable $ Output voltage range: 0.54V to 5.5V $ Input voltage range: 4.5V to 14V $ 1% output voltage accuracy over line, load, and temperature $ ChargeMode control achieves fast transient response, reduced output capacitance, and provides output stability without compensation $ 2-channel output, 2-, 4-, 6-, or 8-phase output with two, three, or four devices $ Switching frequency range 200kHz to 1.33MHz $ Proprietary single-wire DDC (Digital-DC) serial bus enables voltage sequencing and fault spreading with other Intersil digital power ICs $ Inductor peak and averaged over and undercurrent protection $ Digital fault protection for output voltage UV/OV, input voltage UV/OV, temperature, and MOSFET driver voltage $ Accurate average output current measurement with adjustable gain settings for sensing with SPS current monitor outputs or high current, low DCR inductors $ Monitor ADC measures input voltage, input current, output voltage, driver voltage, internal and external temperature $ Nonvolatile memory for storing operating parameters and fault events $ PMBus compliant |
|
||
| ADS1225IRGVT | Texas Instruments | 24-bit 100-SPS ADC with differential input and internal oscillator 16-VQFN -40 to 105 |
|
|
|
| ADS1225IRGVR | Texas Instruments | 24-bit 100-SPS ADC with differential input and internal oscillator 16-VQFN -40 to 105 |
|
||
| ADS1224IPWR | Texas Instruments | 24-bit 240-SPS ADC with 4-channel differential input multiplexer, high-Z buffer, and serial output 20-TSSOP -40 to 85 |
|
||
| ADS1224IPWT | Texas Instruments | 24-bit 240-SPS ADC with 4-channel differential input multiplexer, high-Z buffer, and serial output 20-TSSOP -40 to 85 |
|
|
|
| ADS1224IPWTG4 | Texas Instruments | 24-bit 240-SPS ADC with 4-channel differential input multiplexer, high-Z buffer, and serial output 20-TSSOP -40 to 85 |
|
|
|
| SPS-9110V-1RG Pb-Free | SPS-9110V-1RG Cross Reference | SPS-9110V-1RG Schematic | SPS-9110V-1RG Distributor |
| SPS-9110V-1RG Application Notes | SPS-9110V-1RG RoHS | SPS-9110V-1RG Circuits | SPS-9110V-1RG footprint |
