SY10EL89 COAXIAL CABLE DRIVER

The SY10EL89 is a differential fanout Gate specifically designed to drive coaxial cables. The device is especially useful in Digital Video Broadcast applications. For this application, since the system is polarity-free, each output of the device CAN be used as an independent driver. The driver boasts a voltage gain of approximately 40 and produces output swings twice as large as a standard ECL output. When driving a coaxial cable, proper termination is required at both ends of the line to minimize signal loss. The 1.6V output swings allow for termination at both ends of the cable while maintaining the required 800mV swing at the receiving end of the cable. Because of the larger output swings, the device cannot be terminated into the standard 2.0V. All of the D parameters are tested with a 50, to 3.0V load. Th driver accepts a standard differential ECL input and CAN run off the Digital Video Broadcast standard 5.0V supply By Micrel Semiconductor
SY10EL89 's PackagesSY10EL89 's pdf datasheet



SY10EL89 Pinout, Pinouts
SY10EL89 pinout,Pin out
This is one package pinout of SY10EL89,If you need more pinouts please download SY10EL89's pdf datasheet.

SY10EL89 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

SY10EL89 Pb-Free SY10EL89 Cross Reference SY10EL89 Schematic SY10EL89 Distributor
SY10EL89 Application Notes SY10EL89 RoHS SY10EL89 Circuits SY10EL89 footprint