The LM3880 Power Sequencer offers the easiest method to control power up and power down of multiple power supplies (switchers
or linear regulators). By staggering the startup sequence, it is possible to avoid latch conditions or large in-rush currents
that ...
The ADM1062 is a configurable supervisory/sequencing device that offers a single-chip solution for supply monitoring and sequencing in multiple-supply systems. In addition to these functions, the ADM1062 integrates a 12-bit ADC and six 8-bit voltage output ...
The ADM1063 is a configurable supervisory/sequencing device that offers a single-chip solution for supply monitoring and sequencing in multiple supply systems. In addition to these functions, the ADM1063 integrates a 12-bit ADC that can be used to accurately ...
The ADM1064 is a configurable supervisory/sequencing device that offers a single-chip solution for supply monitoring and sequencing in multiple supply systems. In addition to these functions, the ADM1064 integrates a 12-bit ADC that can be used to accurately ...
The ADM1065 is a configurable supervisory/sequencing device that offers a single-chip solution for supply monitoring and sequencing in multiple-supply systems.
The device also provides up to 10 programmable inputs for monitoring under, over, or out-of-window ...
The ADM1066 is a configurable supervisory/sequencing device that offers a single-chip solution for supply monitoring and sequencing in multiple-supply systems. In addition to these functions, the ADM1066 integrates a 12-bit ADC and six 8-bit voltage output ...
ADM1067 is a configurable supervisory/sequencing device that offers a single-chip solution for supply monitoring and sequencing in multiple supply systems. In addition to these functions, the ADM1067 integrates six 8-bit voltage output DACs. These circuits can ...
The ADM106,ADM102,ADM103,ADM104,ADM105,ADM106,ADM107 is a configurable supervisory/sequencing device
which offers a single chip solution for supply monitoring and sequencing in multiple supply systems.
The device also provides up to eight programmable ...
The ADM1069 is a configurable supervisory/sequencing device that offers a single-chip solution for supply monitoring and sequencing in multiple supply systems. In addition to these functions, the ADM1069 integrates a 12-bit ADC and four 8-bit voltage output ...
The Intersil ISL6123, ISL6124, ISL6125, ISL6126, ISL6127, ISL6128 and ISL6130 are integrated four channel controlled-on/controlled-off power-supply Sequencers with supply monitoring, fault protection and a sequence completed signal (RESET#). For larger ...
The Intersil ISL6123, ISL6124, ISL6125, ISL6126, ISL6127, ISL6128 and ISL6130 are integrated four channel controlled-on/controlled-off power-supply Sequencers with supply monitoring, fault protection and a sequence completed signal (RESET#). For larger ...
The Intersil ISL6123, ISL6124, ISL6125, ISL6126, ISL6127, ISL6128 and ISL6130 are integrated four channel controlled-on/controlled-off power-supply Sequencers with supply monitoring, fault protection and a sequence completed signal (RESET#). For larger ...
The Intersil ISL6123, ISL6124, ISL6125, ISL6126, ISL6127, ISL6128 and ISL6130 are integrated four channel controlled-on/controlled-off power-supply Sequencers with supply monitoring, fault protection and a sequence completed signal (RESET#). For larger ...
The Intersil ISL6123, ISL6124, ISL6125, ISL6126, ISL6127, ISL6128 and ISL6130 are integrated four channel controlled-on/controlled-off power-supply Sequencers with supply monitoring, fault protection and a sequence completed signal (RESET#). For larger ...
The Intersil ISL6123, ISL6124, ISL6125, ISL6126, ISL6127, ISL6128 and ISL6130 are integrated four channel controlled-on/controlled-off power-supply Sequencers with supply monitoring, fault protection and a sequence completed signal (RESET#). For larger ...
The Intersil ISL6123, ISL6124, ISL6125, ISL6126, ISL6127, ISL6128 and ISL6130 are integrated four channel controlled-on/controlled-off power-supply Sequencers with supply monitoring, fault protection and a sequence completed signal (RESET#). For larger ...
The ISL8700, ISL8701, ISL8702 family of ICs provide four delay adjustable sequenced outputs while monitoring an input voltage all with a minimum of external components. High performance DSP, FPGA, P and various subsystems require input power sequencing ...
The ISL8700A, ISL8701A, ISL8702A, ISL8703A, ISL8704A, ISL8705A family of ICs provide four delay adjustable sequenced outputs while monitoring an input voltage all with a minimum of external components. High performance DSP, FPGA, P and various sub-systems ...
The ISL8700, ISL8701, ISL8702 family of ICs provide four delay adjustable sequenced outputs while monitoring an input voltage all with a minimum of external components. High performance DSP, FPGA, P and various subsystems require input power sequencing ...
The ISL8700A, ISL8701A, ISL8702A, ISL8703A, ISL8704A, ISL8705A family of ICs provide four delay adjustable sequenced outputs while monitoring an input voltage all with a minimum of external components. High performance DSP, FPGA, P and various sub-systems ...
The ISL8700, ISL8701, ISL8702 family of ICs provide four delay adjustable sequenced outputs while monitoring an input voltage all with a minimum of external components. High performance DSP, FPGA, P and various subsystems require input power sequencing ...
The ISL8700A, ISL8701A, ISL8702A, ISL8703A, ISL8704A, ISL8705A family of ICs provide four delay adjustable sequenced outputs while monitoring an input voltage all with a minimum of external components. High performance DSP, FPGA, P and various sub-systems ...
The ISL8700A, ISL8701A, ISL8702A, ISL8703A, ISL8704A, ISL8705A family of ICs provide four delay adjustable sequenced outputs while monitoring an input voltage all with a minimum of external components. High performance DSP, FPGA, P and various sub-systems ...
The ISL8700A, ISL8701A, ISL8702A, ISL8703A, ISL8704A, ISL8705A family of ICs provide four delay adjustable sequenced outputs while monitoring an input voltage all with a minimum of external components. High performance DSP, FPGA, P and various sub-systems ...
The ISL8700A, ISL8701A, ISL8702A, ISL8703A, ISL8704A, ISL8705A family of ICs provide four delay adjustable sequenced outputs while monitoring an input voltage all with a minimum of external components. High performance DSP, FPGA, P and various sub-systems ...
The Intersil ISL8723 and ISL8724 are 4 channel Sequencers controlling the on and off sequence of voltages with under voltage supply fault protection and a sequence completed signal (RESET#). For larger systems, more than 4 voltages can be sequenced by a simple ...
The Intersil ISL8723 and ISL8724 are 4 channel Sequencers controlling the on and off sequence of voltages with under voltage supply fault protection and a sequence completed signal (RESET#). For larger systems, more than 4 voltages can be sequenced by a simple ...
The LTC2924 is a power supply sequencer designed for use with external N-channel MOSFETs or power supplies with shutdown pins. Four power supplies can be fully sequenced by a single LTC2924 and up to five supplies can be sequenced to a sixth master supply. The ...
The LTC2926 provides a simple solution for tracking and sequencing up to three power supply rails. An N-channel MOSFET and a few resistors per channel configure the load voltages to ramp up and down together, with voltage offsets, with time delays or with ...
The LTC2927 provides a simple solution to power supply tracking and sequencing requirements. By selecting a few resistors, the supply can be configured to ramp-up and ramp-down with differing ramp rates, voltage offsets, or time delays relative to other ...
The LTC2928 is a four channel cascadable power supply sequencer and high accuracy supervisor. Sequencing thresholds, order and timing are congured with just a few external components, negating the need for PC board layout or software changes during system ...
The MAX5904, MAX5905, MAX5906, MAX5907, MAX5908, MAX5909 dual hot-swap controllers
provide complete protection for dual-supply systems. These devices hot swap two supplies ranging from +1V to +13.2V, provided one supply is at or above 2.7V, allowing the ...
The MAX5904, MAX5905, MAX5906, MAX5907, MAX5908, MAX5909 dual hot-swap controllers
provide complete protection for dual-supply systems. These devices hot swap two supplies ranging from +1V to +13.2V, provided one supply is at or above 2.7V, allowing the ...
The MAX5904, MAX5905, MAX5906, MAX5907, MAX5908, MAX5909 dual hot-swap controllers
provide complete protection for dual-supply systems. These devices hot swap two supplies ranging from +1V to +13.2V, provided one supply is at or above 2.7V, allowing the ...
The MAX5904, MAX5905, MAX5906, MAX5907, MAX5908, MAX5909 dual hot-swap controllers
provide complete protection for dual-supply systems. These devices hot swap two supplies ranging from +1V to +13.2V, provided one supply is at or above 2.7V, allowing the ...
The MAX5904, MAX5905, MAX5906, MAX5907, MAX5908, MAX5909 dual hot-swap controllers
provide complete protection for dual-supply systems. These devices hot swap two supplies ranging from +1V to +13.2V, provided one supply is at or above 2.7V, allowing the ...
The MAX5904, MAX5905, MAX5906, MAX5907, MAX5908, MAX5909 dual hot-swap controllers
provide complete protection for dual-supply systems. These devices hot swap two supplies ranging from +1V to +13.2V, provided one supply is at or above 2.7V, allowing the ...
The MAX1964/MAX1965 power-supply controllers are designed to address cost-sensitive applications demanding voltage sequencing/tracking, such as cable modem consumer premise equipment (CPE), xDSL CPE, and set-top boxes. Operating off a low-cost, unregulated DC ...
The MAX1964/MAX1965 power-supply controllers are designed to address cost-sensitive applications demanding voltage sequencing/tracking, such as cable modem consumer premise equipment (CPE), xDSL CPE, and set-top boxes. Operating off a low-cost, unregulated DC ...
The MAX1858 dual, synchronized, step-down controller generates two outputs from input supplies ranging from 4.75V to 23V. Each output is adjustable from sub-1V to 18V and supports loads of 10A or higher. Input voltage ripple and total RMS input ripple current ...
The MAX6895, MAX6896, MAX6897, MAX6898, MAX6899 is a family of small, low-power,
voltage-monitoring circuits with sequencing capability.
These miniature devices offer tremendous flexibility with
an adjustable threshold capable of monitoring down to
0.5V ...
The MAX6895, MAX6896, MAX6897, MAX6898, MAX6899 is a family of small, low-power, voltage-monitoring circuits with sequencing capability. These miniature devices offer tremendous flexibility with an adjustable threshold capable of monitoring down to 0.5V and an ...
The MAX6895, MAX6896, MAX6897, MAX6898, MAX6899 is a family of small, low-power, voltage-monitoring circuits with sequencing capability. These miniature devices offer tremendous flexibility with an adjustable threshold capable of monitoring down to 0.5V and an ...
The MAX6895, MAX6896, MAX6897, MAX6898, MAX6899 is a family of small, low-power, voltage-monitoring circuits with sequencing capability. These miniature devices offer tremendous flexibility with an adjustable threshold capable of monitoring down to 0.5V and an ...
The MAX6819/MAX6820 are power-supply Sequencers for dual-voltage microprocessors (Ps) and multivoltage systems. These devices monitor a primary supply voltage and enable/disable an external N-channel MOSFET switch for a secondary supply voltage. The ...
The MAX6819/MAX6820 are power-supply Sequencers for dual-voltage microprocessors (Ps) and multivoltage systems. These devices monitor a primary supply voltage and enable/disable an external N-channel MOSFET switch for a secondary supply voltage. The ...
The MAX6877/MAX6878/MAX6879 multivoltage power
trackers Sequencers supervisors monitor up to three
system voltages and provide proper power-up and
power-down control for systems requiring voltage tracking
or sequencing. These devices ensure ...
The MAX6877/MAX6878/MAX6879 multivoltage power
trackers Sequencers supervisors monitor up to three
system voltages and provide proper power-up and
power-down control for systems requiring voltage tracking
or sequencing. These devices ensure ...
The MAX6877/MAX6878/MAX6879 multivoltage power
trackers Sequencers supervisors monitor up to three
system voltages and provide proper power-up and
power-down control for systems requiring voltage tracking
or sequencing. These devices ensure ...
The MAX6883,MAX6882,MAX6881 dual-/triple-voltage monitors
are designed to sequence power supplies during
power-up condition. When all of the voltages exceed
their respective thresholds, these devices turn on voltages
to the system sequentially, enhancing ...
The MAX6883,MAX6882,MAX6881 dual-/triple-voltage monitors are designed to sequence power supplies during power-up condition. When all of the voltages exceed their respective thresholds, these devices turn on voltages to the system sequentially, enhancing ...
The MAX6883,MAX6882,MAX6881 dual-/triple-voltage monitors are designed to sequence power supplies during power-up condition. When all of the voltages exceed their respective thresholds, these devices turn on voltages to the system sequentially, enhancing ...
The MAX6883,MAX6882,MAX6881 dual-/triple-voltage monitors are designed to sequence power supplies during power-up condition. When all of the voltages exceed their respective thresholds, these devices turn on voltages to the system sequentially, enhancing ...
The MAX6870/MAX6871 EEPROM-configurable, multivoltage supply Sequencers supervisors monitor several voltage detector inputs, two auxiliary inputs, and four general-purpose logic inputs. The MAX6870/MAX6871 feature programmable outputs for highly configurable ...
The MAX6870/MAX6871 EEPROM-configurable, multivoltage supply Sequencers supervisors monitor several voltage detector inputs, two auxiliary inputs, and four general-purpose logic inputs. The MAX6870/MAX6871 feature programmable outputs for highly configurable ...
The MAX6872/MAX6873 EEPROM-configurable, multivoltage
supply Sequencers supervisors monitor several
voltage detector inputs and four general-purpose logic
inputs. The MAX6872/MAX6873 feature programmable
outputs for highly configurable power-supply ...
The MAX6872/MAX6873 EEPROM-configurable, multivoltage
supply Sequencers supervisors monitor several
voltage detector inputs and four general-purpose logic
inputs. The MAX6872/MAX6873 feature programmable
outputs for highly configurable power-supply ...
The MAX6874/MAX6875 EEPROM-configurable, multivoltage
supply Sequencers supervisors monitor several
voltage detector inputs and general-purpose logic
inputs, and provide programmable open-drain outputs
for highly configurable power-supply sequencing ...
The MAX6874/MAX6875 EEPROM-configurable, multivoltage
supply Sequencers supervisors monitor several
voltage detector inputs and general-purpose logic
inputs, and provide programmable open-drain outputs
for highly configurable power-supply sequencing ...
The MAX6876 EEPROM-configurable, multivoltage
power tracker/supervisor monitors four system voltages
and ensures proper power-up and power-down conditions
for systems requiring voltage tracking and/or
sequencing. The MAX6876 provides a highly ...
The MAX6889/MAX6890/MAX6891 EEPROM-configurable,
multivoltage supply Sequencers supervisors
monitor several voltage detector inputs and generalpurpose
logic inputs and feature programmable outputs
for highly configurable power-supply ...
The MAX6889/MAX6890/MAX6891 EEPROM-configurable,
multivoltage supply Sequencers supervisors
monitor several voltage detector inputs and generalpurpose
logic inputs and feature programmable outputs
for highly configurable power-supply ...
The MAX6889/MAX6890/MAX6891 EEPROM-configurable,
multivoltage supply Sequencers supervisors
monitor several voltage detector inputs and generalpurpose
logic inputs and feature programmable outputs
for highly configurable power-supply ...
The MAX6892/MAX6893/MAX6894 pin-selectable, multivoltage
supply Sequencers supervisors monitor several
voltage-detector inputs and one watchdog input,
asserting the respective voltage detector or watchdog
output when the inputs drop below the configured ...
The MAX6892/MAX6893/MAX6894 pin-selectable, multivoltage
supply Sequencers supervisors monitor several
voltage-detector inputs and one watchdog input,
asserting the respective voltage detector or watchdog
output when the inputs drop below the configured ...
The MAX6892/MAX6893/MAX6894 pin-selectable, multivoltage
supply Sequencers supervisors monitor several
voltage-detector inputs and one watchdog input,
asserting the respective voltage detector or watchdog
output when the inputs drop below the configured ...
The MIC2584 and MIC2585 are dual-channel positive volt-
age hot swap controllers designed to facilitate the safe
insertion of boards into live system backplanes. The MIC2584
and MIC2585 are available in 16-pin and 24-pin TSSOP
packages, respectively. Using ...
The MIC2580A is a hot-swap controller that provides for safe and orderly insertion and removal of PCI based adapter cards from a PCI hot-plug compliant system backplane or CompactPCI system. ...
The MIC2586 and MIC2586R are single-channel positive voltage hot swap controllers Sequencers designed to provide safe insertion and removal of boards for systems that require live (always-powered) backplanes. These devices use few external components and act ...
The MIC2587 and MIC2587R are single-channel positive voltage hot swap controllers designed to provide safe insertion and removal of boards for systems that require live (always-powered) backplanes. These devices use few external components and act as ...
The MIC2589 and MIC2595 are single-channel, negative-voltage hot swap controllers designed to address the need for safe insertion and removal of circuit boards into \\\"live\\\" system backplanes, while using few external components. The MIC2589/89R and the ...
The MIC2589 and MIC2595 are single-channel, negative-voltage hot swap controllers designed to address the need for safe insertion and removal of circuit boards into \"live\" system backplanes, while using few external components. The MIC2589/89R and the ...