The UC39431 is an adjustable shunt voltage regulator with 100mA sink capability. The architecture, comprised of an error amplifier and transconductance amplifier, gives the user separate control of the small signal error voltage frequency response along with a ...
The UC39432 is an adjustable precision analog controller with 100mA sink capability if the ISET pin is grounded. A resistor between ISET and ground will modify the transconductance while decreasing the maximum current sink. This will add further control in the ...
The LMV431, LMV431A and LMV431B are precision 1.24V shunt regulators capable of adjustment to 30V. Negative feedback from the cathode to the adjust pin controls the cathode voltage, much like a non-inverting op amp configuration (Refer to Symbol and Functional ...
Ideal for space critical applications, the LM4051 precision voltage reference is available in the sub-miniature (3 mm x 1.3 mm) SOT-23 surface-mount package. The LM4051\'s advanced design eliminates the need for an external stabilizing capacitor while ensuring ...
Ideal for space critical applications, the LM4040 precision voltage reference is available in the sub-miniature SC70 and SOT-23 surface-mount package. The LM4040\'s advanced design eliminates the need for an external stabilizing capacitor while ensuring ...
Ideal for space critical applications, the LM4041 precision voltage reference is available in the sub-miniature SC70 and SOT-23 surface-mount packages. The LM4041\'s advanced design eliminates the need for an external stabilizing capacitor while ensuring ...
Ideal for space critical applications, the LM4050 precision voltage reference is available in the sub-miniature (3 mm x 1.3 mm) SOT-23 surface-mount package. The LM4050\'s design eliminates the need for an external stabilizing capacitor while ensuring ...
The LM431 is a 3-terminal adjustable Shunt Regulator with guaranteed temperature stability over the entire temperature range of operation. It is now available in a chip sized package (4-Bump micro SMD) using National\'s micro SMD package technology. The output ...
Ideal for space critical applications, the LM4431 voltage reference is available in the sub-miniature (3 mm x 1.3 mm) SOT-23 surface-mount package. The LM4431\'s advanced design eliminates the need for an external stabilizing capacitor while ensuring stability ...
The LM136-5.0/LM236-5.0/LM336-5.0 integrated circuits are precision 5.0V Shunt Regulator diodes. These monolithic IC voltage references operate as a low temperature coefficient 5.0V zener with 0.6 dynamic impedance. A third terminal on the LM136-5.0 allows the ...
The NCP100 is a precision low voltage Shunt Regulator that is programmable over a voltage range of 0.9 V to 6.0 V. This device features a guaranteed reference accuracy of ?1.7% at 25~C and ?2.6% over the entire temperature range of -40~C to 85~C. The NCP100 ...
The KA431/KA431A/KA431L are three-terminal adjustable
regulator series with a guaranteed thermal stability over
applicable temperature ranges. The output voltage may be
set to any value between VREF (approximately 2.5 volts)
and 36 volts with two external ...
The KA431S, KA431SA, and KA431SL are three-terminal adjustable regulator series with a guaranteed thermal stability over applicable temperature ranges. The output voltage may be set to any value between VREF (approximately 2.5 volts) and 36 volts with two ...
The FAN431/FAN431A/FAN431L are three terminal output adjustable regulators with thermal stability over operating temperature range. The output voltage can be set any value between VREF (approximately 2.5 volts) and 36 volts with two external resistors. These ...
The KA431/KA431A/KA431L are three-terminal adjustable
regulator series with a guaranteed thermal stability over
applicable temperature ranges. The output voltage may be
set to any value between VREF (approximately 2.5 volts)
and 36 volts with two external ...
The LM336Z25 integrated circuits are precision 2.5V shunt regulators. The monolithic IC voltage reference operates as a low temperature coefficient 2.5V zener with 0.2W dynamic impedance. The monolithic IC voltage reference operates as a low temperature ...
The LM431SA/LM431SB/LM431SC are three terminal output adjustable regulators with thermal stability over operating temperature range. The output voltage can be set any value between VREF (approximately 2.5 volts) and 36 volts with two external resistors. These ...
The TL431/TL431A are three-terminal adjustable regulator
series with a guaranteed thermal stability over applicable
temperature ranges. The output voltage may be set to any
value between VREF (approximately 2.5 volts) and 36 volts
with two external ...
The LM336Z5 and LM336BZ5 integrated circuits are precision 5.0V shunt regulators. The monolithic IC voltage reference operates as a low temperature coefficient 5.0V zener with 0.6ohm dynamic impedance. A third terminal on the LM336Z5 and LM336BZ5 allows the ...
The KA431/KA431A/KA431L are three-terminal adjustable
regulator series with a guaranteed thermal stability over
applicable temperature ranges. The output voltage may be
set to any value between VREF (approximately 2.5 volts)
and 36 volts with two external ...
The LM431SA/LM431SB/LM431SC are three terminal output adjustable regulators with thermal stability over operating temperature range. The output voltage can be set any value between VREF (approximately 2.5 volts) and 36 volts with two external resistors. These ...
The LM431SA/LM431SB/LM431SC are three terminal output adjustable regulators with thermal stability over operating temperature range. The output voltage can be set any value between VREF (approximately 2.5 volts) and 36 volts with two external resistors. These ...
The LM431A/LM431B/LM431C are three-terminal output
adjustable regulators with thermal stability over operating
temperature range. The output voltage can be set any value
between VREF (approximately 2.5 volts) and 36 volts with
two external resistors. These ...
The LM431A/LM431B/LM431C are three-terminal output
adjustable regulators with thermal stability over operating
temperature range. The output voltage can be set any value
between VREF (approximately 2.5 volts) and 36 volts with
two external resistors. These ...
The LM431A/LM431B/LM431C are three-terminal output
adjustable regulators with thermal stability over operating
temperature range. The output voltage can be set any value
between VREF (approximately 2.5 volts) and 36 volts with
two external resistors. These ...
The LM336Z5 and LM336BZ5 integrated circuits are precision 5.0V shunt regulators. The monolithic IC voltage reference operates as a low temperature coefficient 5.0V zener with 0.6ohm dynamic impedance. A third terminal on the LM336Z5 and LM336BZ5 allows the ...
TL431C, TL431AC, TL431I, TL431AI, LM431AC Adjustable precision shunt regulators,The TL431 and TL431A are 3-terminal adjustable shunt regulators
with specified thermal stability over applicable automotive and
commercial temperature ranges. The output voltage ...
The MAX6330/MAX6331 combine a precision Shunt Regulator with a power-on reset function in a single SOT23-3 package. They offer a low-cost method of operating small microprocessor (P)-based systems from high-voltage sources, while simultaneously protecting Ps ...
The MAX6330/MAX6331 combine a precision Shunt Regulator with a power-on reset function in a single SOT23-3 package. They offer a low-cost method of operating small microprocessor (P)-based systems from high-voltage sources, while simultaneously protecting Ps ...
The MAX6037 family of low-dropout, micropower voltage references offer fixed and adjustable output voltage options ranging from 1.184V to 5V. Connect an external resistive-divider on the MAX6037_ADJ to adjust the output voltage from 1.184V to 5V. The other ...
The MIC4043 is a Shunt Regulator optimized for secondary-
side regulation in low-voltage power supplies. Featuring an
output stage guaranteed to swing within 400mV of ground,
the MIC4043 can be used in power supplies operating down
to 1.8V, even with ...
The SPX1431 is a 3-terminal adjustable shunt voltage regulator providing a highly accurate
bandgap reference. The SPX1431 acts as an open-loop error amplifier with a 2.5V temperature
compensation reference. The SPX1431\'s thermal stability, wide ...
The SPX2431 is a 3-terminal adjustable shunt voltage regulator providing a highly accurate
bandgap reference. The SPX2431 acts as an open-loop error amplifier with a 2.5V temperature
compensation reference. The SPX2431s thermal stability, wide operating ...
The SPX43 is a three-terminal adjustable shunt voltage regulator providing a highly accurate
bandgap reference. The SPX431 acts as an open-loop error ampliier with a 2.5V temperature
compensation reference. The SPX431 has thermal stability, wide ...
The SPX43 is a three-terminal adjustable shunt voltage regulator providing a highly accurate
bandgap reference. The SPX431 acts as an open-loop error ampliier with a 2.5V temperature
compensation reference. The SPX431 has thermal stability, wide ...
The SPX43 is a three-terminal adjustable shunt voltage regulator providing a highly accurate
bandgap reference. The SPX431 acts as an open-loop error ampliier with a 2.5V temperature
compensation reference. The SPX431 has thermal stability, wide ...
The SPX431L is a 3-terminal adjustable shunt voltage regulator providing a highly accurate
bandgap reference. The SPX431L acts as an open-loop error amplifier with a 2.5V temperature
compensation reference. The SPX431L s thermal stability, wide operating ...
The SPX432 is a 3-terminal adjustable shunt voltage regulator providing a highly accurate 1.24V
bandgap reference with 0.5% tolerance. The SPX432s thermal stability, wide operating curren
(80mA) and temperature range (0C to 105C) makes it suitable for a ...
The LX432 series are low-voltage
precision adjustable shunt regulators with
a reference voltage of 1.24V. The output
voltage may be set to any value between
1.24V and 20V by two external resistors.
These devices offer low output
impedance for ...
The TA76432 series consists of adjustable high-precision shunt
regulators whose output voltage (VKA) can be set arbitrarily
using two external resistors.
These devices have a precise internal reference voltage of 1.26 V,
enabling them to operate at low ...
The TA76432 series consists of adjustable high-precision shunt
regulators whose output voltage (VKA) can be set arbitrarily
using two external resistors.
These devices have a precise internal reference voltage of 1.26 V,
enabling them to operate at low ...
Due to the increasing requirement for low power dissipation
levels, 3-V power supply systems in electronic equipment are now
in greater demand than conventional 5-V power supply systems.
Toshiba has developed the TA76433FC, a high-precision shunt ...
These devices TA76L431FT,TA76L431S are adjustable high-precision shunt regulators
whose output voltage (VKA) can be set arbitrarily using two
external resistors.
The devices have a precise internal reference voltage of 2.49 V,
enabling them to ...
These devices TA76L431FB are adjustable high-precision shunt regulators
whose output voltage (VKA) can be set arbitrarily using two
external resistors.
The devices have a precise internal reference voltage of 2.495 V,
enabling them to operate at low ...
Standard IC>General-Purpose Linear>Shunt Regulators HA17431PNA The HA17431 series is temperature-compensated variable shunt regulators. The main application of these products is in
voltage regulators that provide a variable output voltage. The on-chip ...
Standard IC>General-Purpose Linear>Shunt Regulators HA17432GUP Adjustable Precision Shunt Regulators The HA17431G series is temperature-compensated adjustable precision shunt regulators. The products have improved
features such as wide operating cathode ...
The HA17L431 series and the HA17L431A series are temperature-compensated variable shunt regulators. These ICs
can operate at about half voltage in comparison with HA17431 series. They can be replaced for simple Zener diode and
they can also be used for ...
The CAT102 is a low-voltage reference
and amplifier. Designed for the control loop of low-voltage
power supplies, the reference voltage has been designed for
600mV. Over a junction temperature from -40C to 105C,
the reference voltage is within 8mV of ...
The AHK432 is a low voltage adjustable shunt reference with thermal stability guaranteed over the full industrial temperature range. This 3-terminal regulator has an output voltage range that extends from VREF (1.24V) to 20V, giving designers outstanding ...
The AP431 and AP431A are 3-terminal adjustable precision shunt
regulators with guaranteed temperature stability over the
applicable extended commercial temperature range. The output
voltage may be set at any level greater than 2.495V (VREF) up to ...
The AP432/AP432A are 3-terminal adjustable precision shunt
regulators with guaranteed stable temperature over the
applicable extended commercial temperature range. The output
voltage may be set at any level greater than 1.24/ (VREF) up to ...
The UPC1945 is an adjustable-shunt regulator featuring a high-precision internal reference voltage. The separate
power supply pin (VCC pin) allows the cathode voltage to be dropped to as low as 0.4 V, making this product ideal for
error amplifiers that ...
The UPC1943 , UPC1944 are adjustable high precision shunt regulators. The output voltage can be set to any value between
reference voltage (1.26 V) and 24 V by two external resistors. ...
The UPC1093 are adjustable precision shunt regulators with guaranteed thermal stability. The output voltage can
be set to any value between reference voltage (2.495 V) and 36 V by two external resistors. ...
The AZ431-B is a three-terminal adjustable shunt regu-
lator with guaranteed thermal stability over a full oper-
ation range. It features sharp turn-on characteristics,
low temperature coefficient and low output impedance,
which make it ideal substitute ...
The AZ431L series ICs are low voltage three-terminal
adjustable regulators with guaranteed thermal stability
over a full operation range. These ICs feature sharp
turn-on characteristics, low temperature coefficient
and low output impedance, which make them ...
The AN431 series ICs are three-terminal adjustable
shunt regulators with guaranteed thermal stability over
a full operation range. These ICs feature sharp turn-on
characteristics, low temperature coefficient and low
output impedance, which make them ideal ...
The AZ432 series ICs are low voltage three-terminal
adjustable regulators with guaranteed thermal stability
over a full operation range. These ICs feature sharp
turn-on characteristics, low temperature coefficient
and low output impedance, which make them ...
The AS431 is a three-terminal adjustable shunt regula-
tor with guaranteed thermal stability over a full opera-
tion range. It features sharp turn-on characteristics, low
temperature coefficient and low output impedance,
which make it ideal substitute for ...
The KIA2431P
KIA2431S
KIA2431T
KIA2431AP
KIA2431AS
KIA2431AT
KIA2431BP
KIA2431BS
KIA2431BT are integrated
circuits are three-terminal programmable Shunt Regulator diodes.
These monolithic IC voltage reference operate as a low temperature ...
The NJM1431A is a precision adjustable Shunt Regulator Compared to the conventional 431The NJM1431A offers higher voltage accuracy and small package availability to support a wide range of applications. ...
The NJM2373 is a high precision adjustable Shunt Regulator The output voltage can be set to any value between reference voltage and 14V with two external resistors. ...
The NJM2380 is a high precision adjustable Shunt Regulator It is adapted for downsizing power supply modulebattery charger and othersbecause an ultra mini package SOT-23-5(MTP5) is included in the package line-up. ...
The NJM2820/ NJM2822 NJM2821 is a 1.25V precision shunt
regulator.
High precision voltage accuracy of 0.7%* is realized y
the total optimization from chip design to packaging. In
addition, it features low cathode current of 80uA for low
...
NJM2823 is a precision and low quiescent current shunt voltage reference.Reference voltage form bandgap circuit has guaranteed the high accuracy of the 0.4% with trimming. In addition the temperature drift of15ppm/C typ. was actualized by the temperature ...
NJM2825 is a precision and low quiescent current shunt voltage reference.Reference voltage form bandgap circuit has guaranteed the high accuracy of the 0.5% with trimming. In addition the temperature drift of 10ppm/C typ. was actualized by the temperature ...
The NJM431 is a 3 terminal precision adjustable Shunt Regulator The output voltage can be set to any value between VREF (about 2.5V) and 36V with two external resistors. Output circuitry shows a sharp turn-on characteristics. Applications include shunt ...
The LM4041 is a bandgap circuit designed to achieve a precision micro-power voltage reference of 1.225 V. The device is available in the small outline SOT23 surface mount packages which is ideal for applications where space saving is important.
The LM4041 is ...
The LM4040 is a family of bandgap circuits designed to achieve precision micro-power voltage references of 2.5V and 5.0V. The devices are available in 0.5% C-grade and 1% D-grade initial tolerances.
They are available in small outline SOT23 surface mount ...
The ZR4040-4.1 uses a bandgap circuit design to achieve a precision micropower voltage reference of 4.1 volts. The ZR4040-4.1 design provides a stable voltage without an external capacitor and is stable with capacitive loads. ...
The TLV431 is a three terminal adjustable Shunt Regulator offering
excellent temperature stability and output current handling capability up to
15mA. The output voltage may be set to any chosen voltage between 1.24
volts and 18 volts by selection of two ...
The ZTLV431 is a three terminal adjustable Shunt Regulator offering
excellent temperature stability and output current handling capability up to
20mA. The output voltage may be set to any chosen voltage between 1.24
volts and 10 volts by selection of two ...
The ZHT431 is a three terminal adjustable Shunt Regulator offering excellent temperature stability and output current handling capability up to 100mA. The device offers extended operating temperature range working from -55 to +125C. The output voltage may be ...
The ZR431L is a three terminal adjustable Shunt Regulator offering excellent temperature stability and output current handling capability up to 25mA. The output voltage may be set to any chosen voltage between 1.24 and 10 volts by selection of two external ...
The ZTL431 is a three terminal adjustable Shunt Regulator offering excellent temperature stability and output current handling capability up to 20mA. The output voltage may be set to any chosen voltage between 2.5 volts and 20 volts by selection of two ...
The ZTL432 is a three terminal adjustable Shunt Regulator offering excellent temperature stability and output current handling capability up to 100mA. The output voltage may be set to any chosen voltage between 2.5 and 20 volts by selection of two external ...
The ZHT2431 is a three terminal adjustable Shunt Regulator offering excellent temperature stability and output current handling capability up to 25mA. The output voltage may be set to any chosen voltage between 1.24 and 15 volts by selection of two external ...
The MM1431AT/AN is 3-termial adjustable Shunt Regulator which provides a highly accurate 0.8% bandgap
reference voltage. The output voltage can be adjusted to any value between reference voltage VREF and 35
volts with two external resistors. Moreover, there ...
TS431 series integrated circuits are three-terminal programmable Shunt Regulator diodes. These monolithic IC voltage
references operate as a low temperature coefficient zener which is programmable from VREF to 36 volts with two
external ...
TS432 series is a three-terminal adjustable Shunt Regulator with specified thermal stability. The output voltage may be
set to any value between Vref (approximately 1.24V) and 18V with two external resistors. TS432 series has a typical
output impedance ...
The APL431 is a 3-terminal adjustable voltage reference
with specified thermal stability over applicable
commercial temperature ranges. Output voltage may
be set to any value between V (2.5 V) and 20 V with
REF
two external resistors (See Figure 2). ...
The APL1431 is a 3-terminal adjustable voltage refer-
ence with specified thermal stability over applicable
commercial temperature ranges. Output voltage may
be set to any value between V (2.5 V) and 20 V with
REF
two external resistors (see Figure 2). ...
The UTC TL432D is a three-terminal adjustable Shunt Regulator
highly accurate 0.8V bandgap reference with 1%, 2% tolerance.
The device offers thermal stability, wide operating current (50mA)
and an extended temperature range of 0 to 105C for operation ...
The UTC TL432 is a three-terminal adjustable Shunt Regulator
highly accurate 1.25V bandgap reference with 0.5%, 1% tolerance.
The device offers thermal stability, wide operating current (50mA)
and an extended temperature range of 0 to 105C for operation ...
The UTC TL432C is a three-terminal adjustable Shunt Regulator
highly accurate 1.24V bandgap reference with 1%, 2% tolerance.
The device offers thermal stability, wide operating current (50mA)
and an extended temperature range of 0 to 105C for operation ...
The AP431 is a low voltage three terminal adjustable shunt
regulator with a guaranteed thermal stability over applicable
temperature ranges. The output voltage can be set to any value
between VREF (approximately 2.5 V) to 18V with two external ...
The AP431A are 3-terminal adjustable precision
shunt regulators with guaranteed temperature
stability over the applicable extended commercial
temperature range. The output voltage may be set at
any level greater than 2.495V(VREF) up to 36V merely
by ...
The AP432 are 3-terminal adjustable precision shunt
regulators with guaranteed stable temperature over
the applicable extended commercial temperature
range. The output voltage may be set at any level
greater than 1.24/ (V REF) up to 20V merely by ...
The LM432 is a three terminal adjustable shunt
regulator with thermal stability guaranteed over
temperature. The output voltage can be adjusted
to any value from 1.24V(VREF) to 20V with two
external resistors. The ...
The AMS421 is a four-terminal adjustable open collector Shunt Regulator with guaranteed temperature stability over the entire
range of operation. The output voltage can be set to any value between 0.5V (VREF) and 15V by adding two external resistors.
The ...
