HCS500 The Microchip Technology Inc. HCS500 is a code hop-
ping decoder designed for secure Remote Keyless
Entry (RKE) systems. The HCS500 utilizes the pat-
,
ented KEELOQ code hopping system and high security
learning mechanisms to make this a canned ...
HCS512 The Microchip Technology Inc. HCS512 is a code hop-
ping decoder designed for secure Remote Keyless
Entry (RKE) systems. The HCS512 utilizes the pat-
ented KEELOQ code hopping system and high security
learning mechanisms to make this a canned ...
HCS515 The Microchip Technology Inc. HCS515 is a code hop-
ping decoder designed for secure Remote Keyless
Entry (RKE) systems. The HCS515 utilizes the pat-
ented code hopping system and high security learning
mechanisms to make this a canned solution ...
HCS410 The HCS410 is a code hopping transponder device
designed for secure entry systems. The HCS410 uti-
lizes the patented KEELOQ code hopping system and
bi-directional challenge-and-response for logical and
physical access control. High security ...
HCS412 The HCS412 combines patented KEELOQ code hop
ping technology with bi-directional transponder chal
lenge-and-response security into a single chip solutio
for logical and physical access control.
When used as a code hopping encoder, the HCS412 ...
HCS473 The HCS473 combines the patented KEELOQ code
hopping technology and bi-directional transponder
challenge-and-response security into a single chip
solution for logical and physical access control.
The three-input transponder interface allows the ...
HCS101 As indicated in the block diagram in Figure 1-1, the
HCS101 has a small EEPROM array, which must be
loaded with several parameters before use. These
parameters include: ...
HCS200 The HCS200 from Microchip Technology Inc. is a code
hopping encoder designed primarily for Remote Key-
less Entry (RKE) systems. The device utilizes the
,
KEELOQ code hopping technology, incorporating high
security, a small package outline and low ...
HCS201 The HCS201 from Microchip Technology Inc. is a code
hopping encoder designed for secure Remote Keyless
Entry (RKE) systems. The HCS201 utilizes the KEELOQ
code hopping technology, incorporating high security, a
small package outline and low cost. ...
HCS300 The HCS300 from Microchip Technology Inc. is a code
hopping encoder designed for secure Remote Keyless
Entry (RKE) systems. The HCS300 utilizes the KEELOQ
code hopping technology, incorporating high security, a
small package outline and low cost. ...
HCS301 The HCS301 from Microchip Technology Inc. is a code
hopping encoder designed for secure Remote Keyless
Entry (RKE) systems. The HCS301 utilizes the KEELOQ
code hopping technology, which incorporates high
security, a small package outline and low ...
HCS320 The HCS320 from Microchip Technology Inc. is a code
hopping encoder designed for secure Remote Keyless
Entry (RKE) systems. The HCS320 utilizes the code
hopping technology which incorporates high security, a
small package outline, and low cost, ...
HCS360 The HCS360 is a code hopping encoder designed for secure Remote Keyless Entry (RKE) systems. The HCS360 utilizes Microchips patented KEELOQ hopping technology, which incorporates high security, a small package outline, and low cost, to make this device ...
HCS361 The HCS361 is a code hopping encoder designed for
secure Remote Keyless Entry (RKE) systems. The
HCS361 utilizes the KEELOQ code hopping technology,
which incorporates high security, a small package
outline and low cost, to make this device a ...
HCS362 The HCS362 is a code hopping encoder designed for
secure Remote Keyless Entry (RKE) systems. The
,
HCS362 utilizes the KEELOQ code hopping technol-
ogy, which incorporates high security, a small package
outline and low cost, to make this device a ...
HCS365 The HCS365 is a code hopping encoder designed for
secure Remote Keyless Entry (RKE) and secure
remote control systems. The HCS365 utilizes the
,
KEELOQ code hopping technology, which incorpo-
rates high security, a small package outline, and ...
HCS370 The HCS370 is a code hopping encoder designed for
secure Remote Keyless Entry (RKE) and secure
remote control systems. The HCS370 utilizes the
,
KEELOQ code hopping technology, which incorpo-
rates high security, a small package outline, and ...
The TDA8024 is a complete and cost-efficient analog
interface for asynchronous 3 or 5 V smart cards. It can be
placed between the card and the microcontroller to
perform all supply, protection and control functions. Very
few external components are ...
The TDA8029 is a complete one chip, low cost, low power, robust smart card reader. Its
different power reduction modes and its wide supply voltage range allow its use in
portable equipment. Due to specific versatile hardware, a small embedded ...
The LTC1755/LTC1756 universal Smart Card interfaces are fully compliant with ISO 7816-3 and EMV specifications. The parts provide the smallest and simplest interface circuits between a host microcontroller and general purpose Smart Cards.
An internal charge ...
The LTC1755/LTC1756 universal Smart Card interfaces are fully compliant with ISO 7816-3 and EMV specifications. The parts provide the smallest and simplest interface circuits between a host microcontroller and general purpose Smart Cards.
An internal charge ...
The LTC1955 provides all necessary supervisory and power control functions for two smart cards, two S.A.M. cards or a combination of S.A.M. and smart cards. It provides a charge pump for battery powered applications as well as all necessary level shifting ...
The LTC4556 provides all necessary power control, level translation and supervisory functions for a smart card or S.A.M. card interface. The part contains a low noise charge pump** plus LDO for generating VCC power, as well as all necessary level shifting ...
The LTC4557 provides power conversion and signal level translation needed for 2.5G and 3G cellular telephones to interface with 1.8V or 3V subscriber identity modules (SIMs). The part meets all requirements for 1.8V and 3V SIMs. The part contains LDO ...
The LTC4558 provides the power conversion and signal level translation needed for advanced cellular telephones to interface with 1.8V or 3V subscriber identity modules (SIMs). The device meets all requirements for 1.8V and 3V SIMs and contains LDO regulators ...
The ST8004 is a complete low cost analog
interface for asynchronous 3V and 5V smart
cards. It can be placed between the card and the
microcontroller with few external components to
perform all supply protection and control
functions. Main ...
The ST8024 is a complete low cost analog
interface for asynchronous 3V and 5V smart
cards. It can be placed between the card and the
microcontroller with few external components to
perform all supply protection and control
functions. ST8024 is a ...
The product, member of the ST19N platform, is a
serial access microcontroller specially designed
for cost effective secure portable applications.
It is manufactured using an advanced highly reli-
able ST CMOS EEPROM technology. ...
The product, member of the ST19W platform, is a
serial access microcontroller specially designed
for cost effective secure portable applications.
It is manufactured using an advanced highly reli-
able ST CMOS EEPROM technology. ...
The product, member of the ST19N platform, is a serial access microcontroller specially
designed for cost-effective secure portable applications.
It is manufactured using an advanced highly reliable ST CMOS EEPROM technology.
It is based on the ...
The product, member of the ST19W platform, is a
serial access microcontroller specially designed
for cost effective secure portable applications.
It is manufactured using an advanced highly reli-
able ST CMOS EEPROM technology. ...
The product, member of the ST19W platform, is a
serial access microcontroller specially designed
for cost effective secure portable applications.
It is manufactured using an advanced highly reli-
able ST CMOS EEPROM technology. ...
The product, member of the ST19W platform, is a
serial access microcontroller specially designed
for cost effective secure portable applications.
It is manufactured using an advanced highly reli-
able ST CMOS EEPROM technology. ...
The members of the ST1335, ST1336, ST1355 family are
principally designed for use in prepaid Phonecard
applications. Each is a 272-bit EEPROM device,
with associated security logic and special fuses to
control memory access. The memory is arranged
as a ...
The ST21NFCA is a single chip designed for supporting 13.56 MHz contactless
communication, including Near Field Communication (NFC) functions in the three operating
modes: card emulation, reader and peer-to-peer communication. ...
The ST21F384 product is a serial access microcontroller specially designed for cost-
effective secure mobile applications.
It is based on an enhanced STMicroelectronics 8/16-bit CPU core offering 16 MBytes
linear addressing space. ...
The product, member of the ST19W platform, is a serial access microcontroller specially designed for
cost-effective secure portable applications.
It is manufactured using an advanced highly reliable ST CMOS EEPROM technology. ...
The product, member of the ST19W platform, is a serial access microcontroller specially
designed for cost-effective secure portable applications.
It is manufactured using an advanced highly reliable ST CMOS EEPROM technology. ...
The e5530 is part of a closed coupled identification system. It receives power from an
,
RF transmitter which is coupled inductively to the IDIC . The frequency is typically
100 kHz to 450 kHz. Receiving RF, the IDIC responds with a data stream by ...
Based on ATMEL Smart Card chip design expertise and leadership. The
AT98SC008CT is a fully integrated secure solution (Hardware and Firmware)
designed for embedded systems (Servers/Routers, Peripherals, Set Top Boxes, PDAs,
etc.). ...
Based on ATMEL Smart Card chip design expertise and leadership, the
AT98SC016CU is a fully integrated secure solution (Hardware and Firmware)
designed for embedded systems (Servers/Routers, Peripherals, Set Top Boxes,
PDAs, Vending/gaming machines, etc.). ...
The AT88SC0104C
AT88SC0204C
AT88SC0404C
AT88SC0808C
AT88SC1616C
AT88SC3216C
AT88SC6416C
AT88SC12816C
AT88SC25616C is a family of 9 high-performance secure memory devices providing 1K to
256K bits of user memory with advanced built-in security and ...
The AT88SC153 provides 2,048 bits of serial EEPROM memory organized as one configuration
zone of 64 bytes and three user zones of 64 bytes each. This device is optimized as a secur
memory for multiapplication smart card markets secure identification for ...
The AT88SC1608 provides 17,408 bits of serial EEPROM memory organized as one
configuration zone of 128 bytes and eight user zones of 256 bytes each. This device is
optimized as a ecure memory,for the smart card market, secure identification for elec-
tronic ...
The AT88SC102 device is a low-cost, synchronous, secure memory integrated circuit,
designed for use in prepaid and loyalty smart card applications. The AT88SC102
provides 1024 bits of serial Electrically Erasable and Programmable Read Only
Memory (EEPROM) ...
Description
The AT88SC1003 is a low-cost synchronous integrated circuit, designed for use in
prepaid and loyalty smart card applications. The AT88SC1003 provides 1024 bits of
serial EEPROM (Electrically Erasable and Programmable Read Only Memory) ...
The AT88RF020 is a low-end 13.56 MHz RFID (Radio Frequency IDentification)
device that includes an on-chip EEPROM-based (nonvolatile) memory. The wireless
interface complies with Type B operation of ISO/IEC 14443. The specific sections of
compliance are ...
, ,
The CryptoRF family integrates a 13.56 MHz RF interface into a CryptoMemory ,
resulting in a contactless smart card with advanced security and cryptographic fea-
tures. This device is optimized as a contactless secure memory, for RF smart cards,
and ...
, ,
The CryptoRF family integrates a 13.56 MHz RF interface into a CryptoMemory ,
resulting in a contactless smart card with advanced security and cryptographic fea-
tures. This device is optimized as a contactless secure memory, for RF smart cards,
and ...
, ,
The CryptoRF family integrates a 13.56 MHz RF interface into a CryptoMemory ,
resulting in a contactless smart card with advanced security and cryptographic fea-
tures. This device is optimized as a contactless secure memory, for RF smart cards,
and ...
, ,
The CryptoRF family integrates a 13.56 MHz RF interface into a CryptoMemory ,
resulting in a contactless smart card with advanced security and cryptographic fea-
tures. This device is optimized as a contactless secure memory, for RF smart cards,
and ...
, ,
The CryptoRF family integrates a 13.56 MHz RF interface into a CryptoMemory ,
resulting in a contactless smart card with advanced security and cryptographic fea-
tures. This device is optimized as a contactless secure memory, for RF smart cards,
and ...
, ,
The CryptoRF family integrates a 13.56 MHz RF interface into a CryptoMemory ,
resulting in a contactless smart card with advanced security and cryptographic fea-
tures. This device is optimized as a contactless secure memory, for RF smart cards,
and ...
, ,
The CryptoRF family integrates a 13.56 MHz RF interface into a CryptoMemory ,
resulting in a contactless smart card with advanced security and cryptographic fea-
tures. This device is optimized as a contactless secure memory, for RF smart cards,
and ...
The AT91SO100/101, AT91SO50/51 and the AT91SO25 are a low-power, high-performance, SC100 32-bit microcontroller based on the
ARM, enhanced RISC architecture. This new SC100 core allows the linear addressing of up to 1M bytes of code and data as well as ...
The AT91SO100 , AT91SO50 the AT91SO25 are a low-power, high-performance, SC100 32-bit microcontroller based on the
ARM, enhanced RISC architecture. This new SC100 core allows the linear addressing of up to 1M bytes of code and data as well as a
number of ...
T83C5121
T85C5121
T89C5121
AT83C5121
AT85C5121
AT89C5121 is a high performance CMOS ROM/CRAM derivative of the 80C51 CMOS
single chip 8-bit microcontrollers.
T8xC5121 retains the features of the Atmel 80C51 with extended ROM capacity (16
Kbytes), 512 ...
The AT83C24 AT83C24B
AT83C24NDS is a smart card reader interface IC for smart card reader/writer applica-
tions such as EFT/POS terminals and set top boxes. It enables the management of
any type of smart card from any kind of host. Up to 8 AT83C24 can ...
AT83C5122
AT83EC5122
AT85C5122
AT89C5122
AT89C5122DS
AT83C5123
AT83EC5123 products are high-performance CMOS derivatives of the 80C51 8-bit
microcontrollers designed for USB smart card reader applications. ...
AT83C25OK is based on an Atmel C51 MCU and includes OMNIKEY firmware. It is a single-chip ready-to-use solution that can be quickly and easily integrated into any PCMCIA smart card reader. Compliant with EMV 2000. ...
The AT83C26 is a smart card reader interface IC for smart card reader/writer applications such as EFT/POS terminals and set top boxes. It enables the management of any type of smart card from any kind of host. Up to 4 AT83C26 can be connected in parallel ...
SC23M28 is a smart card module utilizing CMOS EEPROM technology.
1024 bytes main memory with write-protect function and programmable
security code. And the periphery interface is compatible with ISO7816
agreement (synchronous propagation). ...
SC23M42 is a smart card module utilizing CMOS EEPROM
technology. 256 bytes main memory, 32-bit protection memory, 3
bytes user password, and 3-bit password wrong counter (Value:
00000D2D1D0). And the periphery interface is ...
SC23R01 is a smart card module utilizing CMOS EEPROM
technology. It is a multi-application functionality smart card with 1024
bytes EEPROM memory. Its embedded crypto and communication
modules can protect the system from any kind of ...
The TDA8030; TDA8031 is a bus powered full-speed USB
device. All analog and digital functions for an EMV
compliant Smart Card Reader are built-in. The embedded
83C51 microcontroller has 16 kbytes EPROM (ROM for
TDA8031), 256 bytes RAM and 512 bytes of ...
The AT90SC9608RCT is a low-power, high-performance, 8/16-bit microcontroller with ROM program memory, EEPROM
data memory and a crypto-accelerator, based on the secureAVR enhanced RISC architecture. By executing powerful
instructions in a single clock cycle, ...
The ST19SF04, a member of the ST19 device
family, is a serial access microcontroller especially
designed for very large volume and cost competi-
tive secure portable objects.
The ST19SF04 is based on a STMicroelectronics
8 bit CPU core including on-chip ...
