• Product pinout
  • Description
  • PBL3717A,STEPPER MOTOR DRIVER
  • The PBL3717A is a monolithic IC which controls and drives one phase of a bipolar stepper motor with chopper control of the phase current. Current levels may be selected in three steps by means of two logic inputs which select one of three current ...
  • TEA3718,STEPPER MOTOR DRIVER
  • The TEA3718 and TEA3718S are bipolar monolithic integrated circuits intended to control and drive the current in one winding of a bipolar stepper motor. The circuits consist of an LS-TTL compatible logic input, a current sensor, a monostable and an ...
  • GS-D200,2 / 2.5 A BIPOLAR STEPPER MOTOR DRIVE MODULE
  • The GS-D200 and the GS-D200S are drive mod- ules that directly interface a microprocessor to a two phase, bipolar, permanent magnet stepper motors. The phase current is chopper controlled, and the internal phase sequence generation reduces the burden of ...
  • L6208,DMOS Driver For Bipolar Stepper Motor
  • The L6208 is a DMOS Fully Integrated Stepper Motor Driver with non-dissipative Overcurrent Protection, realized in MultiPower-BCD technology, which com- bines isolated DMOS Power Transistors with CMOS and bipolar circuits on the same chip. The device ...
  • L6219,STEPPER MOTOR DRIVER
  • The L6219 is a bipolar monolithic integrated cir- cuits intended to control and drive both winding of a bipolar stepper motor or bidirectionally control two DC motors. The L6219 with a few external components form a complete control and drive circuit for ...
  • L6219R,STEPPER MOTOR DRIVER
  • The L6219R is a bipolar monolithic integrated circuits intended to control and drive both winding of a bipolar stepper motor or bidirectionally control two DC motors.The L6219R with a few external components form a complete control and drive circuit ...
  • L6228,DMOS Driver For Bipolar Stepper Motor
  • The L6228 is a DMOS Fully Integrated Stepper Motor Driver with non-dissipative Overcurrent Protection, realized in MultiPower-BCD technology, which com- bines isolated DMOS Power Transistors with CMOS and bipolar circuits on the same chip. The device ...
  • L6228Q,DMOS Driver For Bipolar Stepper Motor
  • The L6228Q is a DMOS fully integrated stepper motor driver with non-dissipative overcurrent protection, realized in multipower-BCD technology, which combines isolated DMOS power transistors with CMOS and bipolar circuits on the same chip. The device ...
  • L6506,CURRENT CONTROLLER FOR STEPPING MOTORS
  • The L6506/L6506D is a linear integrated circuit designed to sense and control the current in stepping motors and similar devices. When used in conjunction with the L293, L298, L7150, L6114/L6115, the chip se forms a constant current drive for an inductive ...
  • TDA7274,LOW-VOLTAGE DC MOTOR SPEED CONTROLLER
  • The TDA7274 is a monolithic integrated circuit DC motor speed controller intended for use in micro- cassettes, radio cassette players and other con- sumer equipment. It is particulary suitable for low- voltage applications. ...
  • L8202,MULTIFUNCTION ANALOG ASIC
  • L8202 is a multifunction analog ASIC designed for MFP Inkjet printer applications. L8202 integrates 4 full H Bridge drivers, 2 switch- ing Buck type voltage regulators, 4 operational amplifiers, 6 open drain drivers, Reset Generation circuitry and over ...
  • L9935,TWO-PHASE STEPPER MOTOR DRIVER
  • The L9935 is a two- phase stepper motor driver circuit suited to drive bipolar stepper motors. The device can be controlled by a serial interface (SPI). All protections required to design a well protected system (short-circuit, over temperature, cross ...
  • MC33991,MC33991: Dual Gauge Driver Integrated Circuit
  • This MC33991 is a single packaged, Serial Peripheral Interface (SPI) controlled, dual stepper motor gauge driver Integrated Circuit (IC). This monolithic IC consists of four dual output H-Bridge coil drivers and the associated control logic. Each pair ...
  • ATA6830,ATA6830 Intelligent Stepper Motor Driver
  • Intelligent Stepper Motor Driver, Typical Application Headlamp Adjustment The circuit serves to control a stepping motor for dynamic headlamp beam adjustment in automobiles. Two chopper-controlled H-bridges serve as the stepping motor driver. The circuit ...
  • TB6528P,FIVE?PHASE STEPPING MOTOR DRIVE CONTROLLER
  • The TB6528P universal controller for stepping motor drives is a Bi,CMOS monolithic,type IC for controlling five,phase stepping motors. This IC enables five,phase stepping motor drive units to be configured simply by preparing a pulse oscillator, a ...
  • TB6562AFG,Dual Full-Bridge Driver IC For Stepping Motors
  • The TB6562ANG/ TB6562AFG is a 2-phase bipolar stepping motor driver that contains DMOS transistors in the output stage. The driver achieves high efficiency through the use of low ON-resistance DMOS transistors and PWM current control circuitry. ...
  • TB6598FNG,Dual Full-Bridge Driver For Stepping Motors
  • The TB6598FN/ TB6598FNG is a 2-phase bipolar stepping motor driver employing an LDMOS structure with low ON-resistance for output drive transistors. By applying four input signals (EN1, EN2, IN1, IN2), it is possible to control the rotation direction ...
  • TB6608FNG,Stepping Motor Driver IC
  • The TB6608FNG is a PWM constant-current type stepping motor driver IC designed for sinusoidal-input micro-step control of tepping motors. The TB6608FNG can be used in applications that require -phase, 1-2-phase, W1-2-phase and 2W1-2 phase excitation ...
  • TB6596FLG,DC And Stepping Motor Driver IC
  • The TB6596FLG is a DC motor driver IC using LDMOS output transistors with low ON-resistance. The TB6596FLG incorporates one PWM-constant-current H-bridge driver, four direct-PWM-controlled H-bridge drivers, and also one linear constant-current H-bridge ...
  • TB6607FLG,DC And Stepping Motor Driver IC
  • The TB6607FLG is a DC motor driver IC using LDMOS output transistors with low ON-resistance. The TB6607FLG incorporates two PWM-controlled, constant-current H-bridge drivers and three direct-PWM-controlled H-bridge drivers. The TB6607FLG is best ...
  • TA7289P,PWM STEPPING MOTOR DRIVER
  • The TA7289P, TA7289F/ TA7289FG are PWM solenoid driver designed especially for use high efficiency stepping motor control. It consist of 1.5A peak current drive capable output full bridge driver, oscillation circuit for PWM switching, 4bit D,A for ...
  • TA7774FAG,Stepping Motor Driver IC
  • The TA7774P/TA7774PG and TA7774F/TA7774FG/TA7774FAG are two-phase bipolar stepping motor driver ICs designed especially for 3.5- or 5.25-inch FDD head actuator drives. The ICs have a dual-bridge driver supporting the bipolar driving of induced loads, a ...
  • TB6615PG,STEPPING MOTOR CONTROLLER / DRIVER
  • The TB6615PG is a stepping motor controller/driver with MOS output transistors. The TB6615PG can drive a two-phase stepping motor in unipolar mode, and allow the selection of rotation direction between forward and reverse by using clock signals. It also ...
  • A3977,Microstepping DMOS Driver With Translator
  • The A3977 is a complete microstepping motor driver, with builtin translator. It is designed to operate bipolar stepper motors in full-, half-, quarter-, and eighth-step modes, with output drive capability of 35 V and 2.5 A. The A3977 includes a fixed ...
  • A3980,Automotive DMOS Microstepping Driver With Translator
  • The A3980 is a complete microstepping motor driver with built-in translator for easy operation. It is designed to operate bipolar stepper motors in full-, half-, eighth-, and sixteenthstep modes, at up to 35 V and 1 A. The A3980 includes a fixed off-time ...
  • A3982,A3982 DMOS Stepper Motor Driver With Translator
  • The A3984 is a complete microstepping motor driver with built-in translator for easy operation. It is designed to operate bipolar stepper motors in full-, half-, quarter-, and sixteenth-step modes, with an output drive capacity of up to 35 V and 2 A. The ...
  • A3983,A3983 DMOS Microstepping Driver With Translator
  • The A3983 is a complete microstepping motor driver with built-in translator for easy operation. It is designed to operate bipolar stepper motors in full-, half-, quarter-, and eighth-step modes, with an output drive capacity of up to 35 V and 2 A. The A3983 ...
  • A3984,DMOS Microstepping Driver With Translator
  • The A3984 is a complete microstepping motor driver with built-in translator for easy operation. It is designed to operate bipolar stepper motors in full-, half-, quarter-, and sixteenth-step modes, with an output drive capacity of up to 35 V and 2 A. The ...
  • A3987,DMOS Microstepping Driver With Translator
  • The A3987 is a complete microstepping motor driver with built-in translator for easy operation. It is designed to operate bipolar stepper motors in full, half, quarter, and sixteenth step modes, with output drive capability of 50 V and 1.5 A. The A3987 ...
  • A3989,Bipolar Stepper And High Current DC Motor Driver
  • The A3989 is designed operate at voltages up to 36 V while driving one bipolar stepper motor, at currents up to 1.2 A, and one dc motor, at currents up to 2.4 A. The A3989 includes a fixed off-time pulse width modulation (PWM) regulator for current control. ...
  • A4983,DMOS Microstepping Driver With Translator
  • The A4983 is a complete microstepping motor driver with built-in translator for easy operation. It is designed to operate bipolar stepper motors in full-, half-, quarter-, eighth, and sixteenth-step modes, with an output drive capacity of up to 35 V and 2 ...
  • SLA7032M,2-Phase Stepper Motor Unipolar Driver ICs
  • SLA7032M (SLA7033M) is a stepper motor driver IC developed to reduce the number of external parts required by the conven- tional SLA7024M (SLA7026M). This IC successfully eliminates the need for some external parts without sacrificing the features of ...
  • SLA7050M,2-Phase Unipolar Stepper Motor Driver
  • SLA7050M 2-Phase Unipolar Stepper Motor Driver Combining low-power CMOS logic with high-current, high-voltage power FET outputs, the Series SLA7050M SLA7051M SLA7052M translator/driver provides complete control and drive for a two-phase unipolar ...
  • SLA7070MR,2-Phase Unipolar Stepper Motor Driver
  • Full-,and Half-step operation are externally selectable for the SLA7070 SLA7071 SLA7072 SLA7073MR . Full-, Half-, quarter-, and eighth-, and sixteenth-step operation are externally selectable for the SLA7075 SLA7076 SLA7077 SLA7078MR Half-step ...
  • SLA7065M,2-Phase Unipolar Stepper Motor Driver
  • Combining low-power CMOS logic with high-current, high-voltage power FET outputs, the Series SLA7060M SLA7065M SLA7061M SLA7066M SLA7062M SLA7067M translator/drivers provide complete control and drive for a two-phase unipolar stepper motor with ...
  • NJM2671,NJM2671 STEPPER MOTOR CONTROLLER/DRIVER
  • The NJM2671 is a two-phase unipolar stepping motor driver with a motor output of a maximum of 60 V and a maximum current of 500 mA. The Step&Dir (Pulse Input) system of the motor controller enables simple switching between half and full step modes. A high ...
  • NJM2673,NJM2673 STEPPER MOTOR DRIVER
  • The NJM2673 is a stepper motor driver, which consists of a LS-TTL compartible logic input stage, off time control circuitsand a pair of high power H-bridges and protection diodes.The output current is up to1000mA.The NJM2673 with small number of external ...
  • NJM3517,NJM3517 STEPPER MOTOR CONTROLLER/DRIVER
  • The NJM3517 is a stepper motor controller/driverwhich requires minimum of external components and drive currents up to 500mA. The NJM3517 is suited for applications requiring least-possible RFI. Operating in a bi-level drive mode can increase motor ...
  • NJM3717,NJM3717 STEPPER MOTOR DRIVER
  • NJM3717 is a stepper motor diverwhich consists of a LS-TTL compatible logic input stagea current sensora monostable multivibrator and a high power H-bridge output stage with built-in protection diodes. The output current is up to 1200mA. Two NJM3717 and a ...
  • NJM3770A,NJM3770A STEPPER MOTOR DRIVER
  • NJM3770A is a stepper motor driverwhich consists of a LS-TTL compatible logic input stagea current sensora monostable multivibrator and a high power H-bridge output stage. The NJM3770A is a high power version and pincompatible with the NJM3717.Two NJM3770A and ...
  • NJM3771,NJM3771 DUAL STEPPER MOTOR DRIVER
  • The NJM3771 is a stepper motor driverwhich circuit is especially developed for use in microstepping applications in conjunction with the matching dual DAC (Digital-to-Analog Converter) NJU39610. The NJM3771 contains a clock oscillatorwhich is common for both ...
  • NJM3772,NJM3772 DUAL STEPPER MOTOR DRIVER
  • The NJM3772 is a stepper motor driverwhich circuit is especially developed for use in microstepping applications in conjunction with the matching dual DAC (Digital-to-Analog Converter) NJU39610. The NJM3772 contains a clock oscillatorwhich is common for both ...
  • NJM3773,NJM3773 DUAL STEPPER MOTOR DRIVER
  • The NJM3773 is a switch-mode(chopper)constant-current driver with two channels: one for each winding of a two-phase stepper motor. The NJM3773 is also equipped with a Disable input to simplify half-stepping operation. The circuit is well suited for ...
  • NJM3774,NJM3774 DUAL STEPPER MOTOR DRIVER
  • The NJM3774 is a switch-mode (chopper)constantcurrent driver with two channels: one for each winding of a two-phase stepper motor. The NJM3774 is equipped with a TTL level compatible Disable input to simplify half-stepping operation. The circuit is well suited ...
  • NJM3775,NJM3775 DUAL STEPPER MOTOR DRIVER
  • The NJM3775 is a switch-mode(chopper)constantcurrent driver with two channels: one for each winding of a two-phase stepper motor. NJM3775 is equipped with a Disable input to simplify half-stepping operation. The NJM3775 contains a clock oscillatorwhich is ...
  • NJM3777,NJM3777 DUAL STEPPER MOTOR DRIVER
  • The NJM3777 is a switch-mode (chopper)constant-current driver with two channels: one for each winding of a two-phase stepper motor. The NJM3777 is equipped with a Disable input to simplify half-stepping operation. The NJM3777 contains a clock oscillatorwhich ...
  • NJM37770,NJM37770 STEPPER MOTOR DRIVER
  • NJM37770 is a stepper motor driverwhich consists of a LS-TTL compatible logic input stagea current sensora monostable multivibrator and a high power H-bridge output stage. The NJM37770 is a high power version and pincompatible with the NJM37717 and also ...
  • NJU39610,NJU39610 MICROSTEPPING MOTOR CONTROLLER WITH DUAL DAC
  • NJU39610 is a dual 7-bit+signDigital-to-Analog Converter(DAC) especially developed to be used together with the NJM3771 Precision Stepper Motor driver in micro-stepping applications. The NJU39610 has a set of input registers connected to an 8-bit data port for ...
  • NJU39612,NJU39612 MICROSTEPPING MOTOR CONTROLLER WITH DUAL DAC
  • NJU39612 is a dual 7-bit+sign; Digital-to-Analog Converter(DAC) developed to be used in micro stepping applications together with the dual stepper motor driver. The NJU39612 has a set of input registers connected to an 8-bit data port for easy interfacing ...
  • NJU7380,NJU7380 STEPPER MOTOR CONTROLLER
  • NJU7380 is a controller with transrator which convert from input step and direction pulse to driver\'s phase signal for full and half step. NJU7380 translates from pulse input signal (Serial interface) to phase signal inputso NJM3700 series dual channel ...