Low-Dropout, Constant-Current White LED Bias Supply

The T6311A low-dropout bias supply for white LEDs is a high-performance alternative to the simple ballast resistors used in conventional white LED designs. The T6311A uses a single resistor to set the bias current for four LEDs which are matched to 0.3%. The T6311A consumes only 40uA of supply current when enabled and 0.05uA when disabled. The T6311A advantages over ballast resistors include significantly better LED to LED bias matching, much lower bias variation with supply voltage variation, significantly lower dropout voltage, and in some applications, significantly improved efficiency. The T6311A requires a 200mV dropout at a 9mA load on each output to match the LED brightness. The T6311A is available in SOP-8 and SOT23-6 package. By TM Technology Inc.
T6311A 's PackagesT6311A 's pdf datasheet
T6311A-D SOP
T6311A-X SOT-23




T6311A Pinout, Pinouts
T6311A pinout,Pin out
This is one package pinout of T6311A,If you need more pinouts please download T6311A's pdf datasheet.

T6311A Application circuits
T6311A circuits
This is one application circuit of T6311A,If you need more circuits,please download T6311A's pdf datasheet.


Related Electronics Part Number

Related Keywords:

T6311A Pb-Free T6311A Cross Reference T6311A Schematic T6311A Distributor
T6311A Application Notes T6311A RoHS T6311A Circuits T6311A footprint