TDA3602 Multiple Output Voltage Regulator

The TDA3602 is a multiple output voltage Regulator intended for use in car Radios with or without a Microprocessor It contains two fixed voltage Regulators with foldback current protection (Regulators 1 and 2), and one fixed voltage Regulator that also operates during load dump and thermal shutdown. This Regulator CAN be used to supply a Microprocessor A back-up circuit supplies Regulator 3 during a short period after the power is cut off (negative field decay or engine start procedure). A state control pin (pin 4) controls the device, which CAN be switched through four stages using the information at this pin. The switching levels at this pin contain hysteresis.RESET and HOLD outputs CAN be used to Interface with a Microprocessor The RESET signal CAN be used to call up or initialize a Microprocessor (power-on reset). The HOLD signal CAN be used to control the power stages (mute signal in a low end application), or to generate a HOLD interrupt (microprocessor application).An internal Zener Diode on the back-up pin allows this pin to withstand a load dump when supplied by the pin using a 100 W series resistor. The supply pin CAN withstand load dump pulses and negative supply voltages.
By NXP Semiconductors
TDA3602 's PackagesTDA3602 's pdf datasheet
TDA3602-N3 MPF

TDA3602 Pinout, Pinouts
TDA3602 pinout,Pin out
This is one package pinout of TDA3602,If you need more pinouts please download TDA3602's pdf datasheet.

TDA3602 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

TDA3602 Pb-Free TDA3602 Cross Reference TDA3602 Schematic TDA3602 Distributor
TDA3602 Application Notes TDA3602 RoHS TDA3602 Circuits TDA3602 footprint