TDA3681 Multiple Voltage Regulator With Switch And Ignition Buffer

The TDA3681 is a multiple output voltage Regulator with a power Switch and an ignition Buffer It is intended for use in car Radios with or without a Microcontroller The TDA3681 contains the following: Four fixed voltage Regulators with a foldback current protection (regulators 1, 2, 3 and 4). Regulator 2, which is intended to supply a Microcontroller also operates during load dump and thermal shutdown Regulators 3 and 4 have a second supply pin that CAN be connected to a lower supply voltage (>6.5 V) to reduce the power dissipation A power Switch with protection, operated by a control input Reset and hold outputs that CAN be used to Interface with the microcontroller; the reset signal CAN be used to call up the Microcontroller Both supply pins CAN withstand load dump pulses and negative supply voltages Regulator 2, which is in regulation at a backup voltage above 6.5 V A provision for the use of a reserve supply capacitor that will hold enough energy for Regulator 2 (5 V continuous) to allow a Microcontroller to prepare for loss of voltage An ignition input Schmitt Trigger with push-pull output stage.
By NXP Semiconductors
TDA3681 's PackagesTDA3681 's pdf datasheet
TDA3681J-N2
TDA3681JR-N2
TDA3681TH-N2 HSOP




TDA3681 Pinout, Pinouts
TDA3681 pinout,Pin out
This is one package pinout of TDA3681,If you need more pinouts please download TDA3681's pdf datasheet.

TDA3681 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

TDA3681 Pb-Free TDA3681 Cross Reference TDA3681 Schematic TDA3681 Distributor
TDA3681 Application Notes TDA3681 RoHS TDA3681 Circuits TDA3681 footprint