Multi-mode Qam Demodulator

Figure 3 shows the application of the TDA8046 multi-mode QAM Demodulator The frequency of the IF signal (IFQAM) is down converted to a frequency that equals the symbol rate (rs) by a mixer which is driven from a local Oscillator with a frequency of fCAR =fIF +rs. After low pass filtering this baseband signal is applied to an external 8 or 9-bit ADC For 256-QAM, a 9-bit ADC is preferred, for the other modes an 8-bit ADC is sufficient. The multi-mode QAM Demodulator has digital detectors for AGC, Carrier recovery and Clock recovery. The on-chip DACs translate the detector values to Analog control currents which are then integrated by a loop Filter To perform this loop filtering, an Operational Amplifier is integrated after each DAC By NXP Semiconductors
TDA8046 's PackagesTDA8046 's pdf datasheet



TDA8046 Pinout, Pinouts
TDA8046 pinout,Pin out
This is one package pinout of TDA8046,If you need more pinouts please download TDA8046's pdf datasheet.

TDA8046 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

TDA8046 Pb-Free TDA8046 Cross Reference TDA8046 Schematic TDA8046 Distributor
TDA8046 Application Notes TDA8046 RoHS TDA8046 Circuits TDA8046 footprint