Enhanced JFET Low-Power Precision Operational Amplifier

The TL03x series of JFET-input Operational Amplifiers offer improved dc and ac characteristics over the TL06x family of low-power BiFET Operational Amplifiers On-chip zener trimming of offset voltage yields precision grades as low as 1.5 mV (TL031A) for greater accuracy in dc-coupled applications. The Texas Instruments improved BiFET process and optimized designs also yield improved bandwidths and slew rates without increased power consumption. The TL03x devices are pin-compatible with the TL06x and CAN be used to upgrade existing circuits or for optimal performance in new designs.
BiFET Operational Amplifiers offer the inherently higher input impedance of the JFET-input Transistors without sacrificing the output drive associated with bipolar Amplifiers This higher input impedance makes the TL3x Amplifiers better suited for interfacing with high-impedance Sensors or very low-level ac signals. These devices also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption.
The TL03x family has been optimized for micropower operation, while improving on the performance of the TL06x series. Designers requiring significantly faster ac response should consider the Excalibur? TLE206x family of low-power BiFET Operational Amplifiers
Because BiFET Operational Amplifiers are designed for use with dual power supplies, care must be taken to observe common-mode input-voltage limits and output swing when operating from a single supply. DC biasing of the input signal is required, and loads should be terminated to a virtual-ground node at midsupply. The TI TLE2426 integrated virtual-ground generator is useful when operating BiFET Amplifiers from single supplies.
The TL03x devices are fully specified at 15 V and 5 V. For operation in low-voltage and/or single-supply systems, the TI LinCMOS families of Operational Amplifiers (TLC prefix) are recommended. When moving from BiFET to CMOS Amplifiers particular attention should be paid to slew rate, bandwidth requirements, and output loading.
The C-suffix devices are characterized for operation from 0C to 70C. The I-suffix devices are characterized for operation from ?40C to 85C. The M-suffix devices are characterized for operation over the full military temperature range of ?55C to 125C.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
TL031ACJG Texas Instruments OP-AMP, 1800uV OFFSET-MAX, 1.1MHz BAND WIDTH, CDIP8, 0.300 INCH, HERMETIC SEALED, CERAMIC, DIP-8
TL031AMP Texas Instruments OP-AMP, 5800uV OFFSET-MAX, 1MHz BAND WIDTH, PDIP8, PLASTIC, DIP-8
TL031ML Texas Instruments OP-AMP, 1500uV OFFSET-MAX, 1.1MHz BAND WIDTH, PBCY8, METAL CAN, TO-99, 8 PIN
TL031CD Texas Instruments Enhanced JFET Low-Power Precision Operational Amplifier 8-SOIC 0 to 70
TL031IDE4 Texas Instruments OP-AMP, 5300uV OFFSET-MAX, 1MHz BAND WIDTH, PDSO8, GREEN, PLASTIC, MS-012AA, SOIC-8
TL031ACL Texas Instruments OP-AMP, 1800uV OFFSET-MAX, 1.1MHz BAND WIDTH, MBCY8, HERMETIC SEALED, METAL CAN-8
TL031CJG Texas Instruments OP-AMP, 2500uV OFFSET-MAX, 1.1MHz BAND WIDTH, CDIP8, 0.300 INCH, HERMETIC SEALED, CERAMIC, DIP-8
TL031MP Texas Instruments OP-AMP, 6500uV OFFSET-MAX, 1MHz BAND WIDTH, PDIP8, PLASTIC, DIP-8
TL031CDR Texas Instruments Enhanced JFET Low-Power Precision Operational Amplifier 8-SOIC 0 to 70
TL031IPE4 Texas Instruments OP-AMP, 5300uV OFFSET-MAX, 1MHz BAND WIDTH, PDIP8, ROHS COMPLIANT, PLASTIC, DIP-8
TL031 's PackagesTL031 's pdf datasheet
TL031CD SOIC
TL031CDE4 SOIC
TL031CDG4 SOIC
TL031CDR SOIC
TL031CDRE4 SOIC
TL031CDRG4 SOIC
TL031CP PDIP
TL031CPE4 PDIP
TL031CPWLE TSSOP
TL031ID SOIC
TL031IDE4 SOIC
TL031IDG4 SOIC
TL031IP PDIP
TL031IPE4 PDIP




TL031 Pinout, Pinouts
TL031 pinout,Pin out
This is one package pinout of TL031,If you need more pinouts please download TL031's pdf datasheet.

TL031 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

TL031 Pb-Free TL031 Cross Reference TL031 Schematic TL031 Distributor
TL031 Application Notes TL031 RoHS TL031 Circuits TL031 footprint