Enhanced-JFET Precision Operational Amplifier

The TL05x series of JFET-input Operational Amplifiers offers improved dc and ac characteristics over the TL07x and TL08x families of BiFET Operational Amplifiers On-chip Zener trimming of offset voltage yields precision grades as low as 1.5 mV TL051A for greater accuracy in dc-coupled applications. Texas Instruments improved BiFET process and optimized designs also yield improved bandwidth and slew rate without increased power consumption. The TL05x devices are pin-compatible with the TL07x and TL08x and CAN be used to upgrade existing circuits or for optimal performance in new designs.
BiFET Operational Amplifiers offer the inherently higher input impedance of the JFET-input Transistors without sacrificing the output drive associated with bipolar Amplifiers This makes them better suited for interfacing with high-impedance Sensors or very low-level ac signals. They also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption.
The TL05x family was designed to offer higher precision and better ac response than the TL08x, with the low noise floor of the TL07x. Designers requiring significantly faster ac response or ensured lower noise should consider the Excalibur TLE208x and TLE207x families of BiFET Operational Amplifiers
Because BiFET Operational Amplifiers are designed for use with dual power supplies, care must be taken to observe common-mode input voltage limits and output swing when operating from a single supply. DC biasing of the input signal is required, and loads should be terminated to a virtual-ground node at mid-supply. Texas Instruments TLE2426 integrated virtual ground generator is useful when operating BiFET Amplifiers from single supplies.
The TL05x are fully specified at 15 V and 5 V. For operation in low-voltage and/or single-supply systems, Texas Instruments LinCMOS families of Operational Amplifiers (TLC-prefix) are recommended. When moving from BiFET to CMOS Amplifiers particular attention should be paid to the slew rate and bandwidth requirements, and also the output loading.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
TL051ACD Texas Instruments Enhanced-JFET Precision Operational Amplifier 8-SOIC 0 to 70
TL051ACDG4 Texas Instruments Enhanced-JFET Precision Operational Amplifier 8-SOIC 0 to 70
TL051ACP Texas Instruments Enhanced-JFET Precision Operational Amplifier 8-PDIP 0 to 70
TL051AID Texas Instruments Enhanced-JFET Precision Operational Amplifier 8-SOIC -40 to 85
TL051AIP Texas Instruments Enhanced-JFET Precision Operational Amplifier 8-PDIP -40 to 85
TL051AMDR Texas Instruments OP-AMP, 3800uV OFFSET-MAX, 3.1MHz BAND WIDTH, PDSO8, SO-8
TL051AMD Texas Instruments OP-AMP, 3800uV OFFSET-MAX, 3.1MHz BAND WIDTH, PDSO8, SO-8
TL051AMFK Texas Instruments OP-AMP, 3800uV OFFSET-MAX, 3.1MHz BAND WIDTH, CQCC20, CC-20
TL051ACDE4 Texas Instruments Enhanced-JFET Precision Operational Amplifier 8-SOIC 0 to 70
TL051AML Texas Instruments OP-AMP, 800uV OFFSET-MAX, 3.1MHz BAND WIDTH, PBCY8, METAL CAN, TO-99, 8 PIN
TL051A 's PackagesTL051A 's pdf datasheet
TL051ACD SOIC
TL051ACDE4 SOIC
TL051ACDG4 SOIC
TL051ACP PDIP
TL051ACPE4 PDIP
TL051AID SOIC
TL051AIP PDIP




TL051A Pinout, Pinouts
TL051A pinout,Pin out
This is one package pinout of TL051A,If you need more pinouts please download TL051A's pdf datasheet.

TL051A circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

TL051A Pb-Free TL051A Cross Reference TL051A Schematic TL051A Distributor
TL051A Application Notes TL051A RoHS TL051A Circuits TL051A footprint