PWM Controller With Wide Input Range
The TL5001 and TL5001A incorporate on a single monolithic chip all the functions required for a pulse-width-modulation (PWM) control circuit. Designed primarily for power-supply control, the TL5001 A contains an error Amplifier a Regulator an Oscillator a PWM Comparator with a dead-time-control input, undervoltage lockout (UVLO), short-circuit protection (SCP), and an open-collector output Transistor The TL5001A has a typical reference voltage tolerance of 3% compared to 5% for the TL5001.
The error-amplifier common-mode voltage ranges from 0 V to 1.5 V. The noninverting input of the error Amplifier is connected to a 1-V reference. Dead-time control (DTC) CAN be set to provide 0% to 100% dead time by connecting an external resistor between DTC and GND. The Oscillator frequency is set by terminating RT with an external resistor to GND. During low VCC conditions, the UVLO circuit turns the output off until VCC recovers to its normal operating range.
The TL5001C and TL5001AC are characterized for operation from ?20C to 85C. The TL5001I and TL5001AI are characterized for operation from ?40C to 85C. The TL5001Q and TL5001AQ are characterized for operation from ?40C to 125C. The TL5001M and TL5001AM are characterized for operation from ?55C to 125C.
By Texas Instruments
|TL5001MFKB||Texas Instruments||PWM Controller with Wide Input Range 20-LCCC -55 to 125|
|TL5001MJGB||Texas Instruments||PWM Controller with Wide Input Range 8-CDIP -55 to 125|
|TL5001MJG||Texas Instruments||PWM Controller with Wide Input Range 8-CDIP -55 to 125|
|TL5001MFK||Texas Instruments||0.1A SWITCHING CONTROLLER, 500kHz SWITCHING FREQ-MAX, CQCC20, CERAMIC, LCC-20|
|5962-9958301Q2A||Texas Instruments||PWM Controller with Wide Input Range 20-LCCC -55 to 125|
|5962-9958301QPA||Texas Instruments||PWM Controller with Wide Input Range 8-CDIP -55 to 125|
|TL5001M Pb-Free||TL5001M Cross Reference||TL5001M Schematic||TL5001M Distributor|
|TL5001M Application Notes||TL5001M RoHS||TL5001M Circuits||TL5001M footprint|