Gigabit Ethernet Serdes In Small 40-pin Package

The TLK1221 gigabit Ethernet Transceiver provides for high-speed full-duplex point-to-point data transmissions. These devices are based on the Timing requirements of the 10-bit Interface specification by the IEEE 802.3 Gigabit Ethernet specification. The TLK1221 supports data rates from 0.6 Gbps through 1.3 Gbps.
The primary application of these devices is to provide building blocks for point-to-point baseband data transmission over controlled-impedance media of 50 . The transmission media CAN be printed-circuit board traces, copper cables or fiber-optical media. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.
The TLK1221 performs the data serialization, deserialization, and Clock extraction functions for a physical layer Interface device. The transceiver operates at 1.25 Gbps (typical), providing up to 1 Gbps of data bandwidth over a copper or optical media Interface
This device supports the defined 10-bit Interface (TBI). In the TBI mode, the serializer/deserializer (SERDES) accepts 10-bit wide 8b/10b parallel encoded data bytes. The parallel data bytes are serialized and transmitted differentially at PECL-compatible voltage levels. The SERDES extracts Clock information from the input serial stream and deserializes the data, outputting a parallel 10-bit data byte.
A comprehensive series of built-in tests is provided for self-test purposes, including loopback and pseudorandom binary sequence (PRBS) generation and verification.
The TLK1221 is housed in a high-performance, thermally enhanced, 40-pin QFN package. Use of this package does not require any special considerations except to note that the pad, which is an exposed die pad on the bottom of the device, is a metallic thermal and electrical conductor. It is required that the TLK1221 pad be soldered to the thermal land on the board as it serves as the main ground connection for the device.
The TLK1221 is characterized for operation from -40C to 85C.
This device uses a 2.5-V supply. The I/O section is 3.3-V compatible. With the 2.5-V supply, the chipset is very power-efficient, dissipating less than 200 mW typical power when operating at 1.25 Gbps.
The TLK1221 is designed to be hot-plug capable. A power-on reset causes RBC0, RBC1, the parallel output signal terminals, TXP, and TXN to be held in the high-impedance state.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
TLK1221RHAR Texas Instruments Gigabit Ethernet Serdes in small 40-pin package 40-VQFN -40 to 85
TLK1221RHARG4 Texas Instruments Gigabit Ethernet Serdes in small 40-pin package 40-VQFN -40 to 85
TLK1221RHAT Texas Instruments Gigabit Ethernet Serdes in small 40-pin package 40-VQFN -40 to 85
TLK1221RHATG4 Texas Instruments Gigabit Ethernet Serdes in small 40-pin package 40-VQFN -40 to 85
TLK1221 's PackagesTLK1221 's pdf datasheet

TLK1221 Pinout, Pinouts
TLK1221 pinout,Pin out
This is one package pinout of TLK1221,If you need more pinouts please download TLK1221's pdf datasheet.

TLK1221 Application circuits
TLK1221 circuits
This is one application circuit of TLK1221,If you need more circuits,please download TLK1221's pdf datasheet.

Related Electronics Part Number

Related Keywords:

TLK1221 Pb-Free TLK1221 Cross Reference TLK1221 Schematic TLK1221 Distributor
TLK1221 Application Notes TLK1221 RoHS TLK1221 Circuits TLK1221 footprint