1.2 To 1.6 Gigabit Ethernet Transceiver

The TLK2201B and TLK2201BI gigabit Ethernet Transceivers provide for ultrahigh-speed full-duplex point-to-point data transmissions. These devices are based on the Timing requirements of the 10-bit Interface specification by the IEEE 802.3 Gigabit Ethernet specification. The TLK2201B supports data rates from 1.0 Gbps through 1.6 Gbps and the TLK2201BI supports data rates from 1.2 Gbps through 1.6 Gbps.
The primary application of these devices is to provide building blocks for point-to-point baseband data transmission over controlled impedance media of 50 or 75 . The transmission media CAN be printed-circuit board traces, copper cables or fiber-optical media. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.
The TLK2201B and TLK2201BI perform the data serialization, deserialization, and Clock extraction functions for a physical layer Interface device. The transceiver operates at 1.25 Gbps (typical), providing up to 1 Gbps of data bandwidth over a copper or optical media Interface
The TLK2201B and TLK2201BI support both the defined 10-bit Interface (TBI) and a reduced 5-bit Interface utilizing double data rate (DDR) clocking. In the TBI mode the serializer/deserializer (SERDES) accepts 10-bit wide 8b/10b parallel encoded data bytes. The parallel data bytes are serialized and transmitted differentially at PECL compatible voltage levels. The SERDES extracts Clock information from the input serial stream and deserializes the data, outputting a parallel 10-bit data byte.
In the DDR mode the parallel Interface accepts 5-bit wide 8b/10b encoded data aligned to both the rising and falling edge of the reference Clock The data is clocked most significant bit first, (bits 0-4 of the 8b/10b encoded data) on the rising edge of the Clock and the least significant bits (bits 5-9 of the 8b/10b encoded data) are clocked on the falling edge of the Clock
The TLK2201B and TLK2201BI provide a comprehensive series of built-in tests for self-test purposes including loopback and pseudorandom binary sequence (PRBS) generation and verification. An IEEE 1149.1 JTAG port is also supported.
The TLK2201B and TLK2201BI are housed in a high performance, thermally enhanced, 64-pin VQFP PowerPAD package. Use of the PowerPAD package does not require any special considerations except to note that the PowerPAD, which is an exposed die pad on the bottom of the device, is a metallic thermal and electrical conductor. It is recommended that the TLK2201B and TLK2201BI PowerPADs be soldered to the thermal land on the board.
The TLK2201B is characterized for operation from 0C to 70C. The TLK2201BI is characterized for operation from -40C to 85C.
The TLK2201B and TLK2201BI use a 2.5-V supply. The I/O section is 3.3-V compatible. With the 2.5-V supply the chipset is very power-efficient, dissipating less than 200 mW typical power when operating at 1.25 Gbps.
The TLK2201B and TLK2201BI are designed to be hot plug capable. A power-on reset causes RBC0, RBC1, the parallel output signal terminals, TXP, and TXN to be held in high-impedance state.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
TLK2201BIRCPR Texas Instruments 1.2 to 1.6 Gigabit Ethernet Transceiver 64-HVQFP -40 to 85
TLK2201BIRCPG4 Texas Instruments 1.2 to 1.6 Gigabit Ethernet Transceiver 64-HVQFP -40 to 85
TLK2201BIRCP Texas Instruments 1.2 to 1.6 Gigabit Ethernet Transceiver 64-HVQFP -40 to 85
TLK2201BIRCPRG4 Texas Instruments 1.2 to 1.6 Gigabit Ethernet Transceiver 64-HVQFP -40 to 85
TLK2201BI 's PackagesTLK2201BI 's pdf datasheet
TLK2201BIRCP HVQFP
TLK2201BIRCPG4 HVQFP
TLK2201BIRCPR HVQFP
TLK2201BIRCPRG4 HVQFP




TLK2201BI Pinout, Pinouts
TLK2201BI pinout,Pin out
This is one package pinout of TLK2201BI,If you need more pinouts please download TLK2201BI's pdf datasheet.

TLK2201BI Application circuits
TLK2201BI circuits
This is one application circuit of TLK2201BI,If you need more circuits,please download TLK2201BI's pdf datasheet.


Related Electronics Part Number

Related Keywords:

TLK2201BI Pb-Free TLK2201BI Cross Reference TLK2201BI Schematic TLK2201BI Distributor
TLK2201BI Application Notes TLK2201BI RoHS TLK2201BI Circuits TLK2201BI footprint