12-Bit, 200 KSPS, 11 Channel, Low Power, Serial ADC With Internal Reference
The TLV2556 is a 12-bit, switched-capacitor, successive-approximation, Analog-to-digital converter. The ADC has three control inputs [chip select (CS), the input-output Clock and the address/control input (DATAIN)], designed for Communication with the serial port of a host processor or peripheral through a serial 3-state output.
In addition to the high-speed converter and versatile control capability, the device has an on-chip 14-channel multiplexer that CAN select any one of 11 inputs or any one of three internal self-test voltages using configuration Register 1. The sample-and-hold function is Automatic At the end of conversion, when programmed as EOC, the pin 19 output goes high to indicate that conversion is complete. If pin 19 is programmed as INT, the signal goes low when the conversion is complete. The converter incorporated in the device features differential, high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of Analog circuitry from Logic a 12b4 nd supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range. An internal reference is available and its voltage level is programmable via configuration Register 2 (CFGR2).
The TLV2556I is characterized for operation from TA = ?40C to 85C. See available options table for package options.
By Texas Instruments
|TLV2556 Pb-Free||TLV2556 Cross Reference||TLV2556 Schematic||TLV2556 Distributor|
|TLV2556 Application Notes||TLV2556 RoHS||TLV2556 Circuits||TLV2556 footprint|