Fixed-Point Digital Signal Processor

The TMS320VC5507 fixed-point digital signal processor (DSP) is based on the TMS320C55x DSP generation CPU processor core. The C55x? DSP architecture achieves high performance and low power through increased parallelism and total focus on reduction in power dissipation. The CPU supports an internal bus structure that is composed of one program bus, three data read buses, two data write buses, and additional buses dedicated to peripheral and DMA activity. These buses provide the ability to perform up to three data reads and two data writes in a single cycle. In parallel, the DMA controller CAN perform up to two data transfers per cycle independent of the CPU activity.
The C55x CPU provides two multiply-accumulate (MAC) units, each capable of 17-bit 17-bit multiplication in a single cycle. A central 40-bit arithmetic Logic unit (ALU) is supported by an additional 16-bit ALU. Use of the ALUs is under instruction set control, providing the ability to optimize parallel activity and power consumption. These resources are managed in the Address Unit (AU) and Data Unit (DU) of the C55x CPU.
The C55x DSP generation supports a variable byte width instruction set for improved code density. The Instruction Unit (IU) performs 32-bit program fetches from internal or external memory and queues instructions for the Program Unit (PU). The Program Unit decodes the instructions, directs tasks to AU and DU resources, and manages the fully protected pipeline. Predictive branching capability avoids pipeline flushes on execution of conditional instructions.
The 128K bytes of on-chip memory on 5507 is sufficient for many hand-held appliances, portable GPs systems, Wireless speaker phones, portable PDAs, and gaming devices. Many of these appliances typically require 64K bytes or more on-chip memory but less than 128K bytes of memory, and need to operate in standby mode for more than 60% to 70% of time. For the applications which require more than 128K bytes of on-chip memory but less than 256K bytes of on-chip memory, Texas Instruments (TI) offers the TMS320VC5509A device, which is based on the TMS320C55x DSP core.
The general-purpose input and output functions and the 10-bit A/D provide sufficient pins for status, interrupts, and bit I/O for LCDs keyboards, and media Interfaces The parallel Interface operates in two modes, either as a slave to a Microcontroller using the HPI port or as a parallel media Interface using the asynchronous EMIF. Serial media is supported through three McBSPs.
The 5507 peripheral set includes an external memory Interface (EMIF) that provides glueless access to asynchronous Memories like EPROM and SRAM as well as to high-speed, high-density Memories such as synchronous DRAM Additional peripherals include Universal Serial Bus (USB), Real-Time Clock watchdog Timer and I2C multi-master and slave Interface Three full-duplex multichannel buffered serial ports (McBSPs) provide glueless Interface to a variety of industry-standard serial devices, and multichannel Communication with up to 128 separately enabled channels. The enhanced host-port Interface (HPI) is a 16-bit parallel Interface used to provide host processor access to 32K bytes of internal memory on the 5507. The HPI CAN be configured in either multiplexed or non-multiplexed mode to provide glueless Interface to a wide variety of host processors. The DMA controller provides data movement for six independent channel contexts without CPU intervention, providing DMA throughput of up to two 16-bit words per cycle. Two general-purpose Timers up to eight dedicated general-purpose I/O (GPIO) pins, and digital phase-locked loop (DPLL) Clock generation are also included.
The 5507 is supported by the industry?s award-winning eXpressDSP?, Code Composer Studio? Integrated Development Environment (IDE), DSP BIO?., Texas Instruments? algorithm standard, and the industry?s largest third-party network. The Code Composer Studio IDE features code generation tools including a C Compiler and Visual Linker, simulator, RTDX?, XDS51?. emulation device drivers, and evaluation modules. The 5507 is also supported by the C55x DSP Library which features more than 50 foundational software kernels (FIR Filters IIR Filters FFTs, and various math functions) as well as chip and board support libraries.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
TMS320VC5507PGE Texas Instruments Fixed-Point Digital Signal Processor 144-LQFP -40 to 85
TMS320VC5507ZHHR Texas Instruments Fixed-Point Digital Signal Processor 179-BGA MICROSTAR -40 to 85
TMS320VC5507GHH Texas Instruments Fixed-Point Digital Signal Processor 179-BGA MICROSTAR -40 to 85
TMS320VC5507ZHH Texas Instruments Fixed-Point Digital Signal Processor 179-BGA MICROSTAR -40 to 85
TMS320VC5507 's PackagesTMS320VC5507 's pdf datasheet

TMS320VC5507 Pinout, Pinouts
TMS320VC5507 pinout,Pin out
This is one package pinout of TMS320VC5507,If you need more pinouts please download TMS320VC5507's pdf datasheet.

TMS320VC5507 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

TMS320VC5507 Pb-Free TMS320VC5507 Cross Reference TMS320VC5507 Schematic TMS320VC5507 Distributor
TMS320VC5507 Application Notes TMS320VC5507 RoHS TMS320VC5507 Circuits TMS320VC5507 footprint
Hot categories