Stereo 2-W Audio Power Amplifier With Bass Boost And DC Volume Control

The TPA6010A4 is a stereo Audio Power Amplifier in a 28-pin TSSOP thermally enhanced package capable of delivering 2.7 W of continuous RMS output power into 3- loads. When driving 1 W into 8- speakers, the TPA6010A4 has less than 0.22% THD+N across its specified frequency range. The TPA6010A4 has several features optimized for notebook PCs including bass boost, docking station outputs, dc Volume Control and dc gain control. The TPA6010A4 has Buffer and Volume Control gain stages that are set by dc voltages. The Buffer has a differential input and differential output. The gain of the Buffer which is controlled by the dc voltage on the BUFFGAIN terminal, is adjustable from 46 dB to 14 dB. The docking station output is 6 dB lower than the Buffer gain because the Buffer has a differential output and the docking station output is taken from just one of the Buffer outputs. The Volume Control Amplifier is adjustable from 34 dB to 20 dB in the BTL mode and is 6 dB lower in the SE mode. The Volume Control stage is adjustable by dc voltage on the VOLUME terminal. The Amplifier gain from input-to-speaker is the sum of the Volume Control and the Buffer gain. The input-to-speaker gain is adjustable from 86 dB to 34 dB in the BTL mode and 92 dB to 28 dB in the SE mode. The bass boost of the Amplifier sums the right and left inputs, adds gain, Filters out the high frequencies, and then adds the bass boost signal back into the output power Amplifier The frequency of the bass boost is adjusted by adding an RC Filter from BBOUT to BBIN. The gain of the bass boost is set to 12 dB if the same bass is present in both the right and left channels. If the bass is present in just one of the channels, the gain of the bass is set to 9.5 dB. The gain CAN be reduced by adding a voltage divider from BBIN to BBOUT. If not using the bass boost, pull the BBENABLE pin low. The PowerPAD package (PWP) delivers a level of thermal performance that was previously achievable only in TO-220-type packages. Thermal impedances of approximately 35C/W are truly realized in multilayer PCB applications. This allows the TPA6010A4 to operate at full power into 8- loads at ambient temperatures of 85C. By Texas Instruments
Part Manufacturer Description Datasheet Samples
TPA6010A4PWPR Texas Instruments Stereo Class-AB Audio Amplifier with Stereo Headphone Drive, Volume Control and Bass Boost 28-HTSSOP -40 to 85
TPA6010A4PWP Texas Instruments Stereo Class-AB Audio Amplifier with Stereo Headphone Drive, Volume Control and Bass Boost 28-HTSSOP -40 to 85
TPA6010A4EVM Texas Instruments TPA6010A4 Evaluation Module (EVM)
TPA6010A4 's PackagesTPA6010A4 's pdf datasheet
TPA6010A4PWP HTSSOP
TPA6010A4PWPR HTSSOP

TPA6010A4 pdf datasheet download


TPA6010A4 Pinout, Pinouts
TPA6010A4 pinout,Pin out
This is one package pinout of TPA6010A4,If you need more pinouts please download TPA6010A4's pdf datasheet.

TPA6010A4 Application circuits
TPA6010A4 circuits
This is one application circuit of TPA6010A4,If you need more circuits,please download TPA6010A4's pdf datasheet.


Related Electronics Part Number

Related Keywords:

TPA6010A4 Pb-Free TPA6010A4 Cross Reference TPA6010A4 Schematic TPA6010A4 Distributor
TPA6010A4 Application Notes TPA6010A4 RoHS TPA6010A4 Circuits TPA6010A4 footprint