Automotive Catalog LIN Physical Interface

The TPIC1021A is the Local Interconnect Network (LIN) physical Interface which integrates the serial transceiver with wake-up and protection features. The LIN bus is a single-wire bidirectional bus typically used for low-speed in-vehicle networks using data rates between 2.4 kbps and 20 kbps. The LIN protocol output data stream on TXD is converted by the TPIC1021A into the LIN bus signal through a current-limited wave-shaping driver as outlined by the LIN Physical Layer Specification Revision 2.0. The receiver converts the data stream from the LIN bus and outputs the data stream via RXD. The LIN bus has two states: dominant state (voltage near ground) and the recessive state (voltage near battery). In the recessive state, the LIN bus is pulled high by the TPIC1021A?s internal pullup resistor (30 k) and series Diode so no external pullup components are required for slave applications. Master applications require an external pullup resistor (1 k) plus a series Diode per the LIN specification.
In sleep mode, the TPIC1021A requires low quiescent current even though the wake-up circuits remain active, allowing for remote wake up via the LIN bus or local wake up via the NWake or EN pins.
The TPIC1021A has been designed for operation in the harsh automotive environment. The device CAN handle LIN bus voltage swings from 40 V down to ground and survive -40 V. The device also prevents back-feed current through LIN to the supply input, in case of a ground shift or supply voltage disconnection. It also features undervoltage, overtemperature, and loss-of-ground protection. In the event of a fault condition, the output is immediately switched off and remains off until the fault condition is removed.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
TPIC1021AQDRQ1 Texas Instruments Automotive LIN physical interface 8-SOIC -40 to 125
TPIC1021A-Q1 's PackagesTPIC1021A-Q1 's pdf datasheet
TPIC1021AQDRQ1 SOIC




TPIC1021A-Q1 Pinout, Pinouts
TPIC1021A-Q1 pinout,Pin out
This is one package pinout of TPIC1021A-Q1,If you need more pinouts please download TPIC1021A-Q1's pdf datasheet.

TPIC1021A-Q1 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

TPIC1021A-Q1 Pb-Free TPIC1021A-Q1 Cross Reference TPIC1021A-Q1 Schematic TPIC1021A-Q1 Distributor
TPIC1021A-Q1 Application Notes TPIC1021A-Q1 RoHS TPIC1021A-Q1 Circuits TPIC1021A-Q1 footprint
Hot categories