8-Bit Shift Register

The TPIC6A595 is a monolithic, High-Voltage high-current power Logic 8-bit Shift register designed for use in systems that require relatively high load power. The device contains a built-in voltage clamp on the outputs for inductive transient protection. Power Driver applications include relays, solenoids, and other medium-current or High-Voltage loads. Each open-drain DMOS Transistor features an independent chopping current-limiting circuit to prevent damage in the case of a short circuit. This device contains an 8-bit serial-in, parallel-out Shift register that feeds an 8-bit, D-type storage Register Data transfers through both the shift and storage Registers on the rising edge of the Shift register Clock (SRCK) and the Register Clock (RCK), respectively. The storage Register transfers data to the output Buffer when shiftregister clear (SRCLR) is high. When SRCLR is low, the input Shift register is cleared. When output enable (G) is held high, all data in the output Buffers is held low and all drain outputs are off. When G is held low, data from the storage Register is transparent to the output Buffers The serial output (SER OUT) allows for cascading of the data from the Shift register to additional devices. Outputs are low-side, open-drain DMOS Transistors with output ratings of 50 V and a 350-mA continuous sink current capability. When data in the output Buffers is low, the DMOS-transistor outputs are off. When data is high, the DMOS-transistor outputs have sink current capability. Separate power ground (PGND) and Logic ground (LGND) terminals are provided to facilitate maximum system flexibility. All PGND terminals are internally connected, and each PGND terminal must be externally connected to the power system ground in order to minimize parasitic impedance. A single-point connection between LGND and PGND must be made externally in a manner that reduces crosstalk between the Logic and load circuits. The TPIC6A595 is offered in a thermally-enhanced dual-in-line (NE) package and a wide-body surface-mount (DW) package. The TPIC6A595 is characterized for operation over the operating case temperature range of -40C to 125C.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
TPIC6A595DWG4 Texas Instruments 8-bit shift register 24-SOIC -40 to 125
TPIC6A595DW Texas Instruments 8-bit shift register 24-SOIC -40 to 125
TPIC6A595DWR Texas Instruments 8-bit shift register 24-SOIC -40 to 125
TPIC6A595DWRG4 Texas Instruments 8-bit shift register 24-SOIC -40 to 125
TPIC6A595NE Texas Instruments 8-bit shift register 20-PDIP -40 to 125
TPIC6A595 's PackagesTPIC6A595 's pdf datasheet

TPIC6A595 Pinout, Pinouts
TPIC6A595 pinout,Pin out
This is one package pinout of TPIC6A595,If you need more pinouts please download TPIC6A595's pdf datasheet.

TPIC6A595 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

TPIC6A595 Pb-Free TPIC6A595 Cross Reference TPIC6A595 Schematic TPIC6A595 Distributor
TPIC6A595 Application Notes TPIC6A595 RoHS TPIC6A595 Circuits TPIC6A595 footprint
Hot categories