8-Bit Shift Register

The TPIC6A596 is a monolithic, High-Voltage high-current power Logic 8-bit Shift register designed for use in systems that require relatively high load power. The device contains a built-in voltage clamp on the outputs for inductive transient protection. Power Driver applications include relays, solenoids, and other medium-current or High-Voltage loads. Each open-drain DMOS Transistor features an independent chopping current-limiting circuit to prevent damage in the case of a short circuit. This device contains an 8-bit serial-in, parallel-out Shift register that feeds an 8-bit, D-type storage Register Data transfers through both the shift and storage Registers on the rising edge of the shift-register Clock (SRCK) and the Register Clock (RCK), respectively. The storage Register transfers data to the output Buffer when shift-register clear (SRCLR) is high. When SRCLR is low, all Registers in the device are cleared. When output enable G is held high, all data in the output Buffers is held low and all drain outputs are off. When G is held low, data from the storage Register is transparent to the output Buffers The serial output (SER OUT) is clocked out of the device on the falling edge of SRCK to provide additional hold time for cascaded applications. This will provide improved performance for applications where Clock signals may be skewed, devices are not located near one another, or the system must tolerate electromagnetic interference. Outputs are low-side, open-drain DMOS Transistors with output ratings of 50 V and a 350-mA continuous sink current capability. When data in the output Buffers is low, the DMOS-transistor outputs are off. When data is high, the DMOS-transistor outputs have sink current capability. Separate power ground (PGND) and Logic ground (LGND) terminals are provided to facilitate maximum system flexibility. All PGND terminals are internally connected, and each PGND terminal must be externally connected to the power system ground in order to minimize parasitic impedance. A single-point connection between LGND and PGND must be made externally in a manner that reduces crosstalk between the Logic and load circuits. The TPIC6A596 is offered in a thermally-enhanced dual-in-line (NE) package and a wide-body surface-mount (DW) package. The TPIC6A596 is characterized for operation over the operating case temperature range of -40C to 125C.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
TPIC6A596DW Texas Instruments 8-bit shift register 24-SOIC -40 to 125
TPIC6A596DWG4 Texas Instruments 8-bit shift register 24-SOIC -40 to 125
TPIC6A596DWR Texas Instruments 8-Bit Shift Register 24-SOIC -40 to 125
TPIC6A596DWRG4 Texas Instruments 8-bit shift register 24-SOIC -40 to 125
TPIC6A596NE Texas Instruments 8-bit shift register 20-PDIP -40 to 125
TPIC6A596 's PackagesTPIC6A596 's pdf datasheet
TPIC6A596DW SOIC
TPIC6A596DWG4 SOIC
TPIC6A596DWR SOIC
TPIC6A596DWRG4 SOIC




TPIC6A596 Pinout, Pinouts
TPIC6A596 pinout,Pin out
This is one package pinout of TPIC6A596,If you need more pinouts please download TPIC6A596's pdf datasheet.

TPIC6A596 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

TPIC6A596 Pb-Free TPIC6A596 Cross Reference TPIC6A596 Schematic TPIC6A596 Distributor
TPIC6A596 Application Notes TPIC6A596 RoHS TPIC6A596 Circuits TPIC6A596 footprint
Hot categories