Low Input (2.25V-5.5V) 300 KHz Frequency, Synchronous Buck Controller, Source/ Sink, Prebias Operati

The TPS4000x are controllers for low-voltage, non-isolated synchronous buck Regulators These controllers drive an N-Channel MOSFET for the primary buck Switch and an N-Channel MOSFET for the synchronous Rectifier Switch thereby achieving very high-efficiency power conversion. In addition, the device controls the delays from main Switch off to Rectifier turn-on and from Rectifier turn-off to main Switch turn-on in such a way as to minimize Diode losses (both conduction and recovery) in the synchronous Rectifier with TI?s proprietary Predictive Gate Drive? technology. The reduction in these losses is significant and increases efficiency. For a given converter power level, smaller FETs CAN be used, or heat sinking CAN be reduced or even eliminated. The current-limit threshold is adjustable with a single resistor connected to the device. The TPS4000x controllers implement a closed-loop soft start function. Startup ramp time is set by a single external capacitor connected to the SS/SD pin. The SS/SD pin is also used for shutdown.
By Texas Instruments