Regulated 3.0-V High Efficiency Charge Pump With Power Good Indicator
The TPS6012x Step-up regulated Charge Pumps generate a 3.3-V or 3-V 4% output voltage from a 1.8-V to 3.6-V input voltage (two alkaline, NiCd, or NiMH batteries). They CAN deliver an output current of at least 200 mA (100 mA for the TPS60122 and TPS60123 , all from a 2-V input. Four external capacitors are needed to build a complete high efficiency DC/DC Charge Pump converter. To achieve the high efficiency over a wide input voltage range, the Charge Pump automatically selects between a 1.5x or doubler conversion mode. From a 2-V input, all ICs CAN start with full load current.
The devices feature the power-saving pulse-skip mode to extend battery life at light loads. TPS60120 TPS60122 and TPS60124 include a low battery Comparator TPS60121 TPS60123 and TPS60125 feature a power-good output. The Logic shutdown function reduces the supply current to a maximum of 1uA and disconnects the load from the input. Special current-control circuitry prevents excessive current from being drawn from the battery during start-up. This DC/DC converter requires no inductors, therefore EMI is of low concern. It is available in the small, thermally enhanced 20-pin PowerPADTM package (PWP).
By Texas Instruments
|TPS60125PWP||Texas Instruments||Regulated 3.0-V High Efficiency Charge Pump With Power Good Indicator 20-HTSSOP -40 to 85|
|TPS60125PWPG4||Texas Instruments||Regulated 3.0-V High Efficiency Charge Pump With Power Good Indicator 20-HTSSOP -40 to 85|
|TPS60125PWPRG4||Texas Instruments||0.2A SWITCHED CAPACITOR REGULATOR, 450kHz SWITCHING FREQ-MAX, PDSO20, GREEN, PLASTIC, HTSSOP-20|
|TPS60125PWPR||Texas Instruments||0.2A SWITCHED CAPACITOR REGULATOR, 450kHz SWITCHING FREQ-MAX, PDSO20, GREEN, PLASTIC, HTSSOP-20|
|TPS60125 Pb-Free||TPS60125 Cross Reference||TPS60125 Schematic||TPS60125 Distributor|
|TPS60125 Application Notes||TPS60125 RoHS||TPS60125 Circuits||TPS60125 footprint|