Regulated 3.3-V Low Ripple Charge Pump With Low Battery Indicator

The TPS6020x Step-up regulated Charge Pumps generate a 3.3-V 4% output voltage from a 1.8-V to 3.6-V input voltage. The devices are typically powered by two Alkaline, NiCd, or NiMH battery cells and operate down to a minimum supply voltage of 1.6 V. Continuous output current is a minimum of 100 mA from a 2-V input. Only four external capacitors are needed to build a complete low-ripple DC/DC converter. The push-pull operating mode of two single-ended Charge Pumps assures the low output voltage ripple, as current is continuously transferred to the output.
The devices operate in the newly developed LinSkip mode. In this operating mode, the device switches seamlessly from the power saving pulse-skip mode at light loads to the low-noise constant-frequency, linear-regulation mode once the output current exceeds the LinSkip threshold of about 7 mA. Even in pulse-skip mode, the output ripple is maintained at a very low level because the output resistance of the Charge Pump is still regulated.
Three operating modes CAN be programmed using the EN pin. EN = low disables the device, shuts down all internal circuits, and disconnects the output from the input. EN = high enables the device and programs it to run from the internal Oscillator The devices operate synchronized to an external Clock signal if EN is clocked; thus, switching harmonics CAN be controlled and minimized. The devices include a low-battery detector that issues a warning if the battery voltage drops below a user-defined threshold voltage, or a power-good detector that goes active when the output voltage reaches about 90% of its nominal value.
Device options with either a low-battery or power good detector are available. This DC/DC converter requires no inductors, therefore, EMI of the system is reduced to a minimum. It is available in the small 10-pin MSOP package (DGS).
By Texas Instruments
Part Manufacturer Description Datasheet Samples
TPS60204DGSG4 Texas Instruments Regulated 3.3-V Low Ripple Charge Pump with Low Battery Indicator 10-VSSOP -40 to 85
TPS60204DGS Texas Instruments Regulated 3.3-V Low Ripple Charge Pump with Low Battery Indicator 10-VSSOP -40 to 85
TPS60204DGSR Texas Instruments Regulated 3.3-V Low Ripple Charge Pump with Low Battery Indicator 10-VSSOP -40 to 85
TPS60204DGSRG4 Texas Instruments Regulated 3.3-V Low Ripple Charge Pump with Low Battery Indicator 10-VSSOP -40 to 85
TPS60204 's PackagesTPS60204 's pdf datasheet
TPS60204DGS MSOP
TPS60204DGSG4 MSOP
TPS60204DGSR MSOP
TPS60204DGSRG4 MSOP




TPS60204 Pinout, Pinouts
TPS60204 pinout,Pin out
This is one package pinout of TPS60204,If you need more pinouts please download TPS60204's pdf datasheet.

TPS60204 Application circuits
TPS60204 circuits
This is one application circuit of TPS60204,If you need more circuits,please download TPS60204's pdf datasheet.


Related Electronics Part Number

Related Keywords:

TPS60204 Pb-Free TPS60204 Cross Reference TPS60204 Schematic TPS60204 Distributor
TPS60204 Application Notes TPS60204 RoHS TPS60204 Circuits TPS60204 footprint