170 UVrms Zero-Ripple Switched Cap Boost Converter With Fixed 2.7V Output For VCO Supply
The TPS6024x is a switched capacitor voltage converter, ideally suited for VCO and PLL applications that require low noise and tight tolerances. Its dual-cap design uses four ceramic capacitors to provide ultralow output ripple yet high efficiency, while eliminating the need for inefficient linear Regulators
A wide input supply voltage range of 2.7 V to 5.5 V makes the TPS6024x ideal for lithium-based battery applications. The TPS60240 2/3 operates down to 1.8 V, supporting a 3.3-V, 2.7-V, 3-V output from two-cell, nickel- or alkaline-based chemistries. The devices work equally well for low EMI DC/DC Step-up conversion without the need for an inductor. The high switching frequency (typical 160 kHz) promotes the use of small surface-mount capacitors, saving board space. The converter?s shutdown mode conserves battery energy.
The devices are thermally protected and current-limited for reliable operation even under persisting fault conditions. Normal quiescent current (ground pin current) is only 250 uA, and typically 0.1 uA in shutdown mode. The TPS6024x devices come in a thin, 8-pin MSOP (DGK) package with a component height of only 1,1 mm.
By Texas Instruments
|TPS60242DGKT||Texas Instruments||170 uVrms Zero-Ripple Switched Cap Boost Converter With Fixed 2.7V Output For VCO Supply 8-VSSOP -40 to 85|
|TPS60242DGKTG4||Texas Instruments||0.012A SWITCHED CAPACITOR REGULATOR, 220kHz SWITCHING FREQ-MAX, PDSO8, GREEN, PLASTIC, MSOP-8|
|TPS60242DGK||Texas Instruments||170 uVrms Zero-Ripple Switched Cap Boost Converter With Fixed 2.7V Output For VCO Supply 8-VSSOP|
|TPS60242 Pb-Free||TPS60242 Cross Reference||TPS60242 Schematic||TPS60242 Distributor|
|TPS60242 Application Notes||TPS60242 RoHS||TPS60242 Circuits||TPS60242 footprint|