Automotive Catalog Unregulated 60 M-A Charge Pump Voltage Inverter
The TPS6040x is a family of devices that generate an unregulated negative output voltage from an input voltage ranging from 1.6 V to 5.5 V. The devices are typically supplied by a preregulated supply rail of 5 V or 3.3 V. Due to its wide input voltage range, two or three NiCd, NiMH, or alkaline battery cells, as well as one Li-Ion cell CAN also power them.
Only three external 1-F capacitors are required to build a complete DC/DC Charge Pump inverter. Assembled in a 5-pin SOT23 package, the complete converter CAN be built on a 50-mm2 board area. Additional board area and component count reduction is achieved by replacing the Schottky Diode that is typically needed for start-up into load by integrated circuitry.
The TPS6040x CAN deliver a maximum output current of 60 mA with a typical conversion efficiency of greater than 90% over a wide output current range. Three device options with 20-kHz, 50-kHz, and 250-kHz fixed frequency operation are available. One device comes with a variable switching frequency to reduce operating current in applications with a wide load range and enables the design with low-value capacitors.
By Texas Instruments
|TPS60403QDBVRQ1||Texas Instruments||Automotive Catalog Unregulated 60 m-A Charge Pump Voltage Inverter 5-SOT-23 -40 to 85|
|TPS60403-Q1 Pb-Free||TPS60403-Q1 Cross Reference||TPS60403-Q1 Schematic||TPS60403-Q1 Distributor|
|TPS60403-Q1 Application Notes||TPS60403-Q1 RoHS||TPS60403-Q1 Circuits||TPS60403-Q1 footprint|