• Product pinout
  • Description
  • LM26,SOT-23, ±3°C Accurate, Factory Preset Thermostat
  • The LM26 is a precision, single digital-output, low-power thermostat comprised of an internal reference, DAC, temperature sensor and comparator. Utilizing factory programming, it can be manufactured with different trip points as well as different digital ...
  • LM56,Dual Output Low Power Thermostat
  • The LM56 is a precision low power thermostat. Two stable temperature trip points (VT1 and VT2) are generated by dividing down the LM56 1.250V bandgap voltage reference using 3 external resistors. The LM56 has two digital outputs. OUT1 goes LOW when the ...
  • AD22105,Low Voltage, Resistor Programmable Thermostatic Switch
  • The AD22105 is a solid state thermostatic switch. Requiring only one external programming resistor, the AD22105 can be set to switch accurately at any temperature in the wide operating range of -40C to +150C. Using a novel circuit architecture, the AD22105 ...
  • STLM75,Digital Temperature Sensor And Thermal Watchdog
  • The STLM75 is a high-precision digital CMOS temperature sensor IC with a sigma-delta 2 temperature-to-digital converter and an I C-compatible serial digital interface (see Figure 1 on page 7). It is targeted for general applications such as personal ...
  • MM3188,Temperature Switch With Latch Function
  • This IC is a temperature switch MM3188 IC that senses the IC ambient temperature and switches the IC output from the Low to the High level when there is a detected temperature. In addition, the latch function maintains the output at the High level even when ...
  • S-8130AA,TEMPERATURE SWITCH IC WITH LATCH
  • The S-8130AA is a temperature switch with a latch function having a built-in semiconductor temperature sensor with the accuracy of 2.5C. The output signal is inverted when the temperature is detected, and latched until a reset signal input or a ...
  • DS56,Dual Temperature Comparator
  • The DS56 Dual Temperature Comparator has two independent open-drain thermostat outputs and respective trip point inputs. The trip points are set with external resistors that divide down the 1.25V internal bandgap voltage reference. The voltage resulting from ...