The UC27136 UC37136 bipolar dual Switch contains all the control and drive circuitry required to drive resistive, capacitive, and inductive loads as in industrial Sensor applications. The output drivers are 250-mA NPN power switches that CAN Switch a load between a voltage supply up to 35 V and GND with a continuous output current rating of 250 mA, combined or individually. Internal 46-V Zener clamps are provided to clamp collector-to-emitter NPN power Switch voltages to safe levels when driving inductive loads. The two outputs CAN be configured in any combination of high side (load to GND) or low side (load to VCC). The output of Switch 1 is fixed in phase with the CMOS compatible IN1 pin. The CMOS compatible exclusive OR Gate inputs, IN2 and INV2, determine the output phase of Switch 2. An under voltage lockout (UVLO) function is provided to disable both output NPN Power Switches until VCC is greater than 8 V. Both output NPN Power Switches CAN also be disabled past the UVLO enable trip point by an external user programmable time delay capacitor. An internal current limit function enables a low on/off duty cycle of the NPN Power Switches should the dc current go beyond 1 A. An internal thermal shutdown function disables the switches if the IC temperature reaches 155C such as in an overcurrent condition. By Texas Instruments
UC27136 's PackagesUC27136 's pdf datasheet

UC27136 Pinout will be updated soon..., now you can download the pdf datasheet to check the pinouts !
UC27136 Application circuits
UC27136 circuits
This is one application circuit of UC27136,If you need more circuits,please download UC27136's pdf datasheet.

Related Electronics Part Number

Related Keywords:

UC27136 Pb-Free UC27136 Cross Reference UC27136 Schematic UC27136 Distributor
UC27136 Application Notes UC27136 RoHS UC27136 Circuits UC27136 footprint