High Speed PWM Controller

The UC1825 family of PWM control ICs is optimized for high frequency switched mode power supply applications. Particular care was given to minimizing propagation delays through the Comparators and Logic circuitry while maximizing bandwidth and slew rate of the error Amplifier This controller is designed for use in either current-mode or voltage mode systems with the capability for input voltage feed-forward.
Protection circuitry includes a current limit Comparator with a 1V threshold, a TTL compatible shutdown port, and a soft start pin which will double as a maximum duty cycle clamp. The Logic is fully latched to provide jitter free operation and prohibit multiple pulses at an output. An under-voltage lockout section with 800mV of hysteresis assures low start up current. During under-voltage lockout, the outputs are high impedance.
These devices feature totem pole outputs designed to source and sink high peak currents from capacitive loads, such as the Gate of a Power MOSFET The on state is designed as a high level.
By Texas Instruments
UC2825M 's PackagesUC2825M 's pdf datasheet

UC2825M Pinout, Pinouts
UC2825M pinout,Pin out
This is one package pinout of UC2825M,If you need more pinouts please download UC2825M's pdf datasheet.

UC2825M Application circuits
UC2825M circuits
This is one application circuit of UC2825M,If you need more circuits,please download UC2825M's pdf datasheet.

Related Electronics Part Number

Related Keywords:

UC2825M Pb-Free UC2825M Cross Reference UC2825M Schematic UC2825M Distributor
UC2825M Application Notes UC2825M RoHS UC2825M Circuits UC2825M footprint