Resonant-Mode Power Supply Controllers

The UC1861-1868 family of ICs is optimized for the control of Zero Current Switched and Zero Voltage Switched quasi-resonant converters. Differences between members of this device family result from the various combinations of UVLO thresholds and output options. Additionally, the one-shot pulse steering Logic is configured to program either on-time for ZCS systems (UC1865-1868), or off-time for ZVS applications (UC1861-1864).
The primary control blocks implemented include an error Amplifier to compensate the overall system loop and to drive a voltage controlled Oscillator (VCO), featuring programmable minimum and maximum frequencies. Triggered by the VCO the one-shot generates pulses of a programmed maximum width, which CAN be modulated by the Zero Detection Comparator This circuit facilitates "true" zero current or voltage switching over various line, load, and temperature changes, and is also able to accommodate the resonant components' initial tolerances.
Under-Voltage Lockout is incorporated to facilitate safe starts upon power-up. The supply current during the under-voltage lockout period is typically less than 150A, and the outputs are actively forced to the low state.
UVLO thresholds for the UC1861/62/65/66 are 16.5V (ON) and 10.5V (OFF), whereas the UC1863 64/67/68 thresholds are 8V (ON) and 7V (OFF). After VCC exceeds the UVLO threshold, a 5V generator is enabled which provides bias for the internal circuits and up to 10mA for external usage.
A Fault Comparator serves to detect fault conditions and set a latch while forcing the output drivers low. The Soft-Ref pin serves three functions: providing soft start, restart delay, and the internal system reference.
Each device features dual 1 Amp peak totem pole output drivers for direct Interface to Power MOSFETs The outputs are programmed to alternate in the UC1861/63/65/67 devices. The UC1862/64/66/68 outputs operate in unison alllowing a 2 Amp peak current.
By Texas Instruments
UC2865 's PackagesUC2865 's pdf datasheet
UC2865N PDIP
UC2865NG4 PDIP




UC2865 Pinout, Pinouts
UC2865 pinout,Pin out
This is one package pinout of UC2865,If you need more pinouts please download UC2865's pdf datasheet.

UC2865 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

UC2865 Pb-Free UC2865 Cross Reference UC2865 Schematic UC2865 Distributor
UC2865 Application Notes UC2865 RoHS UC2865 Circuits UC2865 footprint