9-Line Low Capacitance SCSI Active Terminator

The UC5612 provides 9 lines of active termination for a SCSI (Small Computer Systems Interface) parallel bus. The SCSI standard recommends active termi- nation at both ends of the cable segment. The only functional differences between the UC5603 and UC5612 is the ab- sence of the negative clamps on the output lines. Parametrically, the UC5612 has a 5% tolerance on impedance and current compared to a 3% tolerance on the UC5603. Custom power packages are utilized to allow normal operation at full power (2 Watts). The UC5612 provides a disconnect feature which, when opened or driven high, disconnects all terminating resistors, disables the Regulator and greatly reduces standby power consumption. The output channels remain high impedance even without Termpwr applied. A low channel capacitance of 5pF allows interim points of the bus to have little to no effect on the signal integrity. Internal circuit trimming is utilized, first to trim the impedance to a 5% tolerance, and then most importantly, to trim the output current to a 5% tolerance, as close to the maximum SCSI specification as possible. This maximizes the noise mar- gin in fast SCSI operation. Other features include thermal shutdown and cur- rent limit. This device is offered in low thermal resistance versions of the industry stand- ard 16 pin narrow body SOIC, 16 pin ZIP (zig-zag in line package) and 24 pin TSSOP. By Texas Instruments
UC5612 's PackagesUC5612 's pdf datasheet



UC5612 Pinout, Pinouts
UC5612 pinout,Pin out
This is one package pinout of UC5612,If you need more pinouts please download UC5612's pdf datasheet.

UC5612 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

UC5612 Pb-Free UC5612 Cross Reference UC5612 Schematic UC5612 Distributor
UC5612 Application Notes UC5612 RoHS UC5612 Circuits UC5612 footprint
Hot categories