PFC Controller For Low To Medium Power Applications Requiring Compliance With IEC 1000-3-2

The UCC38050 and UCC38051 are PFC controllers for low-to-medium power applications requiring compliance with IEC 1000-3-2 harmonic reduction standard. It is designed for controlling a boost preregulator operating in transition mode (also referred to as boundary conduction mode or critical conduction mode operation). It features a transconductance voltage Amplifier for feedback error processing, a simple multiplier for generating a current command proportional to the input voltage, a current-sense (PWM) Comparator PWM Logic and a totem-pole driver for driving an external FET
In the transition mode operation, the PWM circuit is self-oscillating with the turn-on being governed by an inductor zero-current detector (ZCD pin) and the turn-off being governed by the current-sense Comparator Additionally, the controller provides features such as peak current limit, default Timer overvoltage protection (OVP) and enable.
The UCC38050 and UCC38051 while being pin compatible with other industry controllers providing similar functionality, offer many feature enhancements and tighter specifications, leading to an overall reduction in system implementation cost. The system performance is enhanced by incorporation of zero power detect function which allows the controller output to shut down at light load conditions without running into overvoltage. The device also features innovative slew rate enhancement circuits which improve the large signal transient performance of the voltage error Amplifier The low start-up and operating currents of the device results in low power consumption and ease of start-up. Highly accurate internal bandgap reference leads to tight regulation of output voltage in normal and OVP conditions, resulting in higher system reliability. The enable Comparator ensures that the controller is off if the feedback sense path is broken or if the input voltage is very low.
There are two key parameteric differences between UCC38050 and UCC38051. The UVLO turn-on threshold of UCC38050 is 15.8 V while for UCC38051 it is 12.5 V. Secondly, the gM amplifier?s source current for UCC38050 is typically 1.3 mA while for UCC38051 it is 300 A. The higher UVLO turn-on threshold of the UCC38050 allows quicker and easier start-up with a smaller VCC capacitance while the lower UVLO turn-on threshold of UCC38051 allows the operation of the PFC chip to be easily controlled by the downsteam PWM Controller in two-stage power converters. The UCC38050 gM Amplifier also provides a full 1.3-mA typical source current for faster start-up and improved transient response when output is low either at start-up or during transient conditions. The UCC38051 scales this source current back down to 300- A typical source current to gradually increase the error voltage preventing a step increase in line currents at start-up but still provides good transient response. The UCC38051 is suitable for multiple applications including AC adapters where a two-stage power conversion is needed. The UCC38050 is suitable for applications such as electronic ballasts where there is no down-stream PWM conversion and the advantages of smaller VCC capacitor and improved transient response CAN be realized.
Devices are available in either the industrial temperature range of ?40C to 105C (UCC2805x) or commercial temperature range of 0C to 70C (UCC3805x). Package offerings are 8-pin SOIC (D) or 8-pin PDIP (P) packages.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
UCC28051PE4 Texas Instruments PFC Controller for low to medium power applications requiring compliance with IEC 1000-3-2 8-PDIP -40 to 105
UCC28051P Texas Instruments PFC Controller for low to medium power applications requiring compliance with IEC 1000-3-2 8-PDIP -40 to 105
UCC28051DR Texas Instruments PFC Controller for low to medium power applications requiring compliance with IEC 1000-3-2 8-SOIC -40 to 105
UCC28051D Texas Instruments PFC Controller for low to medium power applications requiring compliance with IEC 1000-3-2 8-SOIC -40 to 105
UCC28051DRG4 Texas Instruments PFC Controller for low to medium power applications requiring compliance with IEC 1000-3-2 8-SOIC -40 to 105
UCC28051DG4 Texas Instruments PFC Controller for low to medium power applications requiring compliance with IEC 1000-3-2 8-SOIC -40 to 105
UCC28051EVM Texas Instruments UCC28051 Evaluation Module
UCC28051 's PackagesUCC28051 's pdf datasheet
UCC28051D SOIC
UCC28051DG4 SOIC
UCC28051DR SOIC
UCC28051DRG4 SOIC
UCC28051P PDIP
UCC28051PE4 PDIP

UCC28051 pdf datasheet download


UCC28051 Pinout, Pinouts
UCC28051 pinout,Pin out
This is one package pinout of UCC28051,If you need more pinouts please download UCC28051's pdf datasheet.

UCC28051 Application circuits
UCC28051 circuits
This is one application circuit of UCC28051,If you need more circuits,please download UCC28051's pdf datasheet.


Related Electronics Part Number

Related Keywords:

UCC28051 Pb-Free UCC28051 Cross Reference UCC28051 Schematic UCC28051 Distributor
UCC28051 Application Notes UCC28051 RoHS UCC28051 Circuits UCC28051 footprint