Negative Floating Single, Hot-Swap IC Commercial Temp.

The UCCx913 family of negative voltage circuit breakers provides complete Power Management hot-swap, and fault handling capability. The device is referenced to the negative input voltage and is driven through an external resistor connected to ground, which is essentially a current drive as opposed to the traditional voltage drive. The on-board 10-V Shunt Regulator protects the device from excess voltage and serves as a reference for programming the maximum allowable output sourcing current during a fault. In the event of a constant fault, the internal Timer limits the on-time from less than 0.1% to a maximum of 3%. The duty cycle modulates depending on the current into the PL pin, which is a function of the voltage across the FET and limits average power dissipation in the FET The fault level is fixed at 50 mV across the current-sense resistor to minimize total dropout. The fault current level is set with an external Current Sense resistor. The maximum allowable sourcing current is programmed with a voltage divider from VDD to generate a fixed voltage on the IMAX pin. The current level, when the output appears as a current source, is equal to VIMAX/RSENSE. If desired, a controlled current startup CAN be programmed with a capacitor on the IMAX pin.
When the output current is below the fault level, the output device is switched on. When the output current exceeds the fault level, but is less than the maximum sourcing level programmed by the IMAX pin, the output remains switched on, and the fault Timer starts charging CT. Once CT charges to 2.5 V, the output device is turned off and performs a retry some time later. When the output current reaches the maximum sourcing current level, the output appears as a current source, limiting the output current to the set value defined by IMAX.
Other features of the UCCx913 family include undervoltage lockout, and 8-pin small outline (SOIC) and dual-in-line (DIP) packages.
By Texas Instruments
Part Manufacturer Description Datasheet Samples
UCC3913N Texas Instruments Negative Floating Single, Hot-Swap IC Commercial Temp. 8-PDIP 0 to 70
UCC3913DTR Texas Instruments Negative Floating Single, Hot-Swap IC Commercial Temp. 8-SOIC 0 to 70
UCC3913DTRG4 Texas Instruments Negative Floating Single, Hot-Swap IC Commercial Temp. 8-SOIC 0 to 70
UCC3913DR Texas Instruments 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8, PLASTIC, MS-012AA, SOIC-8
UCC3913NG4 Texas Instruments 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDIP8, GREEN, PLASTIC, DIP-8
UCC3913J Texas Instruments 1-CHANNEL POWER SUPPLY SUPPORT CKT, CDIP8, CERAMIC, DIP-8
UCC3913NR Texas Instruments 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDIP8, PLASTIC, PDIP-8
UCC3913D Texas Instruments Negative Floating Single, Hot-Swap IC Commercial Temp. 8-SOIC 0 to 70
UCC3913DG4 Texas Instruments Negative Floating Single, Hot-Swap IC Commercial Temp. 8-SOIC 0 to 70
UCC3913 's PackagesUCC3913 's pdf datasheet
UCC3913D SOIC
UCC3913DG4 SOIC
UCC3913DTR SOIC
UCC3913DTRG4 SOIC
UCC3913N PDIP
UCC3913NG4 PDIP




UCC3913 Pinout, Pinouts
UCC3913 pinout,Pin out
This is one package pinout of UCC3913,If you need more pinouts please download UCC3913's pdf datasheet.

UCC3913 Application circuits
UCC3913 circuits
This is one application circuit of UCC3913,If you need more circuits,please download UCC3913's pdf datasheet.


Related Electronics Part Number

Related Keywords:

UCC3913 Pb-Free UCC3913 Cross Reference UCC3913 Schematic UCC3913 Distributor
UCC3913 Application Notes UCC3913 RoHS UCC3913 Circuits UCC3913 footprint