UClamp0511T Low Profile μClampTM 1-Line ESD Protection

The μClampTM series of TVs arrays are designed to pro- tect sensitive electronics from damage or latch-up due to ESD It is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, note- book computers, and other portable electronics. It fea- tures large cross-sectional area junctions for conducting high transient currents. They offer desirable character- istics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The μClampTM0511T is in a 2-pin, RoHS/WEEE compli- ant, SLP1006P2T package. It measures 1.0 x 0.6 mm with a nominal height of only 0.4mm. The leads are spaced at a pitch of 0.65mm and are finished with lead-free NiPdAu. Each device will protect one line operating at 5 volts. It gives the designer the flexibility to protect single lines in applications where arrays are not practical. They may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (±15kV air, ±8kV contact discharge). The combination of small size and high ESD surge capability makes them ideal for use in portable applications such as cellular phones, digital cameras, and MP3 players. By Semtech Corporation
UCLAMP0511T 's PackagesUCLAMP0511T 's pdf datasheet



UCLAMP0511T Pinout, Pinouts
UCLAMP0511T pinout,Pin out
This is one package pinout of UCLAMP0511T,If you need more pinouts please download UCLAMP0511T's pdf datasheet.

UCLAMP0511T circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

UCLAMP0511T Pb-Free UCLAMP0511T Cross Reference UCLAMP0511T Schematic UCLAMP0511T Distributor
UCLAMP0511T Application Notes UCLAMP0511T RoHS UCLAMP0511T Circuits UCLAMP0511T footprint