Low Profile μClampTM 1-Line ESD Protection

The μClampTM series of TVs arrays are designed to pro- tect sensitive electronics from damage or latch-up due to ESD It is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, note- book computers, and other portable electronics. It fea- tures large cross-sectional area junctions for conducting high transient currents. They offer desirable character- istics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The μClampTM1211T is in a 2-pin, RoHS/WEEE compli- ant, SLP1006P2T package. It measures 1.0 x 0.6 mm with a nominal height of only 0.4mm. The leads are spaced at a pitch of 0.65mm and are finished with lead-free NiPdAu. Each device will protect one line operating at 12 volts. It gives the designer the flexibil- ity to protect single lines in applications where arrays are not practical. They may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (±15kV air, ±8kV contact discharge). The combination of small size and high ESD surge capability makes them ideal for use in portable applications such as cellular phones, digital cameras, and MP3 players. By Semtech Corporation
UCLAMP1211T 's PackagesUCLAMP1211T 's pdf datasheet



UCLAMP1211T Pinout, Pinouts
UCLAMP1211T pinout,Pin out
This is one package pinout of UCLAMP1211T,If you need more pinouts please download UCLAMP1211T's pdf datasheet.

UCLAMP1211T circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

UCLAMP1211T Pb-Free UCLAMP1211T Cross Reference UCLAMP1211T Schematic UCLAMP1211T Distributor
UCLAMP1211T Application Notes UCLAMP1211T RoHS UCLAMP1211T Circuits UCLAMP1211T footprint