UMA1015AM Low-power Dual Frequency Synthesizer For Radio Communications

The UMA1015AM is a low-power dual Frequency Synthesizer for Radio Communications which operates in the 50 to 1100 MHz frequency range. Each synthesizer consists of a fully programmable main divider, a phase and frequency detector and a Charge Pump There is a fully programmable reference divider common to both synthesizers which operates up to 35 MHz. The device is programmed via a 3-wire serial bus which operates up to 10 MHz. The Charge Pump currents (gains) are fixed by an external resistance at pin 20 (ISET). The BiCMOS device is designed to operate from 2.7 V (3 NiCd cells) to 5.5 V at low current. Digital supplies VDD1 and VDD2 must be at the same potential. The Charge Pump supply (VCC) CAN be provided by an external source or on-chip voltage doubler. VCC must be equal to or higher than VDD1. Each synthesizer CAN be powered-down independently via the serial bus to save current. It is also possible to power-down the device via the HPD input (pin 5).
By NXP Semiconductors
UMA1015AM 's PackagesUMA1015AM 's pdf datasheet

UMA1015AM Pinout, Pinouts
UMA1015AM pinout,Pin out
This is one package pinout of UMA1015AM,If you need more pinouts please download UMA1015AM's pdf datasheet.

UMA1015AM Application circuits
UMA1015AM circuits
This is one application circuit of UMA1015AM,If you need more circuits,please download UMA1015AM's pdf datasheet.

Related Electronics Part Number

Related Keywords:

UMA1015AM Pb-Free UMA1015AM Cross Reference UMA1015AM Schematic UMA1015AM Distributor
UMA1015AM Application Notes UMA1015AM RoHS UMA1015AM Circuits UMA1015AM footprint