UMA1017M Low-voltage Frequency Synthesizer For Radio Telephones

The UMA1017M BICMOS device integrates prescalers, a programmable divider, and phase Comparator to implement a phase-locked loop. The device is designed to operate from 3 NiCd cells, in pocket phones, with low current and nominal 5 V supplies.The synthesizer operates at RF input frequencies up to 1.25 GHz. The synthesizer has a fully programmable reference divider. All divider ratios are supplied via a 3-wire serial programming bus.Separate power and ground pins are provided to the Analog and digital circuits. The ground leads should be externally short-circuited to prevent large currents flowing across the die and thus causing damage. Digital supplies VDD1 and VDD2 must also be at the same potential. VCC must be equal to or greater than VDD (i.e. VDD = 3 V and VCC = 5 V for wider tuning range). The phase detector uses two Charge Pumps one provides normal loop feedback, while the other is only active during fast mode to speed-up switching. All Charge Pump currents (gain) are fixed by an external resistance at pin ISET (pin 14). Only passive loop Filters are used; the charge-pumps function within a wide voltage compliance range to improve the overall system performance.
By NXP Semiconductors
UMA1017M 's PackagesUMA1017M 's pdf datasheet

UMA1017M Pinout, Pinouts
UMA1017M pinout,Pin out
This is one package pinout of UMA1017M,If you need more pinouts please download UMA1017M's pdf datasheet.

UMA1017M circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

UMA1017M Pb-Free UMA1017M Cross Reference UMA1017M Schematic UMA1017M Distributor
UMA1017M Application Notes UMA1017M RoHS UMA1017M Circuits UMA1017M footprint