UMA1021M Low-voltage Frequency Synthesizer For Radio Telephones

The UMA1021M BICMOS device integrates a prescaler, programmable dividers, and a phase Comparator to implement a phase-locked loop. The device is designed to operate from 3 NiCd cells, in pocket phones, with low current and nominal 3 V supplies. The synthesizer operates at RF input frequencies up to 2.2 GHz, with a fully programmable reference divider. All divider ratios are supplied via a 3-wire serial programming bus. Separate power and ground pins are provided to the Analog (charge-pump) and digital circuits. The ground leads should be externally short-circuited to prevent large currents flowing across the die and thus causing damage. VDD1 and VDD2 must also be at the same potential (VDD). VCC must be equal to or greater than VDD (e.g. VDD =3 V and VCC = 5 V for wider VCO control voltage range). The phase detector has two charge-pump outputs, CP and CPF, the latter of which is enabled directly at pin FAST. This permits the design of adaptive loops. The charge pump currents (phase detector gain) are fixed by an external resistance at pin ISET and via the serial Interface Only a passive loop Filter is necessary; the Charge Pumps function within a wide voltage compliance range to improve the overall system performance.
By NXP Semiconductors
UMA1021M 's PackagesUMA1021M 's pdf datasheet



UMA1021M Pinout, Pinouts
UMA1021M pinout,Pin out
This is one package pinout of UMA1021M,If you need more pinouts please download UMA1021M's pdf datasheet.

UMA1021M circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

UMA1021M Pb-Free UMA1021M Cross Reference UMA1021M Schematic UMA1021M Distributor
UMA1021M Application Notes UMA1021M RoHS UMA1021M Circuits UMA1021M footprint