The TRF1122 up-converts a UHF IF signal to an RF signal in the 2100-MHz to 2700-MHz range for 2.5-GHz radio applications. The TRF1122 has 20 dB of gain and an output P-1 dB of +14 dBm, typical. A TTL compatible, 1-bit 16-dB switched attenuator is provided for ...
The GC4016 quad receiver chip contain four identical down-conversion circuits. Each downconvert circuit accepts a real sample rate up to 100 MHz, down converts a selected carrier frequency to zero, decimates the signal rate by a programmable factor ranging ...
The GC4116 quad transmit chip contains four identical up-conversion channels. The up-convert channels accept real or complex signals, interpolate them by programmable amounts ranging from 32 to 5,792, and modulates them up to selected center frequencies. The ...
The GC5016 is a flexible wideband 4-channel digital up-converter and down-converter. The GC5016 is designed for high-speed, high bandwidth digital signal processing applications like 3G cellular base transceiver station transmit and receive channels. The ...
The GC5018 is a multi-channel communications signal processor that provides digital downconversion optimized for cellular base transceiver systems. The device supports UMTS, CDMA-1X and TD-SCDMA air interface cellular standards. The chip provides up to 8 UMTS ...
The GC5316 is a high-density multi-channel communications signal processor integrated circuit that provides both digital downconversion and digital upconversion optimized for cellular base transceiver systems. The device supports both UMTS and CDMA2000 (CDMA) ...
The GC5318 is a high-density multi-channel communications signal processor integrated circuit that provides digital upconversion optimized for cellular base transceiver systems. The device supports both UMTS and CDMA2000 (CDMA) air interface cellular ...
The TRF1222 up-converts a UHF IF signal to an RF signal in the 3300 to 3800 MHz range for 3.5-GHz radio applications. The TRF1222 has 18 dB of gain and an output P-1dB of 14 dBm, typical. A TTL compatible, 1-bit 16-dB digital attenuator is provided for gain ...
The AD9873 is a mixed signal front-end developed for broadband communications applications. It includes a complete 12-bit, 232 MSPS digital up-converter, 12-bit ADC, 10-bit ADC, two 8-bit ADCs, and two sigma-delta control DACs. Although it was developed for ...
The AD9877 is a single supply Cable Modem/Set Top Box Mixed Signal Front End. The device contains a transmit path interpolation filter, a complete quadrature digital upconverter and transmit DAC. The receive path contains a 12-bit ADC and Dual 8-bit ADCs. All ...
The AD9860/AD9862 receive path includes dual high-performance, 10-/12-bit, 64 MSPS analog to digital converters, with input buffers, programmable gain amplifiers, and decimation filters. The transmit path contains dual high-performance 12-/14-bit 128 MSPS ...
The AD9856 integrates a high-speed direct-digital synthesizer (DDS), a high-performance, high-speed 12-bit Digital-to-Analog converter (DAC), clock multiplier circuitry, digital filters, and other DSP functions onto a single chip, to form a complete quadrature ...
The AD9857 integrates a high-speed direct-digital synthesizer (DDS), a high-performance, high-speed 14-bit digital-to-analog converter (DAC), clock multiplier circuitry, digital filters, and other
DSP functions onto a single chip, to form a complete ...
The AD9957 functions as a universal I/Q modulator and agile upconverter for communications systems where cost, size, power consumption, and dynamic performance are critical. The AD9957 integrates a high speed, direct digital synthesizer (DDS), a high ...
The ISL5217 Quad Programmable UpConverter (QPUC) is a QASK/FM modulator/FDM upconverter designed for high dynamic range applications such as cellular basestations. The QPUC combines shaping and interpolation filters, a complex modulator, and timing and carrier ...
The LT5511 mixer is designed to meet the high linearity requirements of cable TV infrastructure downstream transmitters and wireless infrastructure transmit systems. The IC includes a differential LO buffer amplifier driving a double-balanced mixer. The LO, RF ...
The LT5519 mixer is designed to meet the high linearity requirements of wireless and cable infrastructure transmission systems. A high speed, internally 50 Ohm matched, LO amplifier drives a double-balanced mixer core, allowing the use of a low power, ...
The LT5520 mixer is designed to meet the high linearity requirements of wireless and cable infrastructure transmission applications. A high-speed, internally matched, LO amplifier drives a double-balanced mixer core, allowing the use of a low power, ...
The LT5521 is a very high linearity mixer optimized for low distortion and low LO leakage applications. The chip includes a high speed LO buffer with single-ended input and a double-balanced active mixer. The LT5521 requires only 5dBm LO input power to achieve ...
The LT5560 is a low power, high performance broadband active mixer. This double-balanced mixer can be driven by a single-ended LO source and requires only 2dBm of LO power. The balanced design results in low LO leakage to the output, while the integrated input ...
The LT5579 mixer is a high performance upconverting mixer optimized for frequencies in the 1.5GHz to 3.8GHz range. The single-ended LO input and RF output ports simplify board layout and reduce system cost. The mixer needs only -1dBm of LO power and the ...
The MAX2021 low-noise, high-linearity, direct upconversion/downconversion quadrature modulator/demodulator is designed for RFID handheld and portal readers, as well as single and multicarrier 750MHz to 1200MHz GSM/EDGE, cdma2000, WCDMA, and iDEN base-station ...
The MAX2039 high-linearity passive upconverter or
downconverter mixer is designed to provide 7.3dB NF
and a 7.1dB conversion loss for an RF frequency range
of 1700MHz to 2200MHz to support UMTS/WCDMA,
DCS, and PCS base-station transmitter or ...
The MAX2022 low-noise, high-linearity, direct upconversion
quadrature modulator is designed for single
and multicarrier 1800MHz to 2200MHz UMTS/WCDMA,
cdma2000, and DCS/PCS base-station applications.
Direct upconversion architectures are ...
The MAX2023 low-noise, high-linearity, direct upconversion/
downconversion quadrature modulator/demodulator
is designed for single and multicarrier 1500MHz to
2300MHz DCS 1800/PCS 1900 EDGE, cdma2000,
WCDMA, and PHS/PAS base-station applications.
Direct ...
The MAX2031 high-linearity passive upconverter or downconverter mixer is designed to provide +36dBm IIP3, 7dB NF, and 7dB conversion loss for an 815MHz to 1000MHz RF frequency range to support GSM/cellular base-station transmitter or receiver applications. ...
The MAX2410 performs the RF front-end transmit/receive function in time-division-duplex (TDD) communication systems. It operates over a wide frequency range and is optimized for RF frequencies around 1.9GHz. Applications include most popular cordless and PCS ...
The MAX2411A performs the RF front-end transmit/receive function in time-division-duplex (TDD) communication systems. It operates over a wide frequency range and is optimized for RF frequencies around 1.9GHz. Applications include most popular cordless and PCS ...
The MAX2660/MAX2661/MAX2663/MAX2671/MAX2673 miniature, low-cost, low-noise upconverters are designed for low-voltage operation and are ideal for use in portable consumer equipment. Signals at the IF input port are mixed with signals at the local oscillator ...
The MAX2660/MAX2661/MAX2663/MAX2671/MAX2673 miniature, low-cost, low-noise upconverters are designed for low-voltage operation and are ideal for use in portable consumer equipment. Signals at the IF input port are mixed with signals at the local oscillator ...
The MAX2660/MAX2661/MAX2663/MAX2671/MAX2673 miniature, low-cost, low-noise upconverters are designed for low-voltage operation and are ideal for use in portable consumer equipment. Signals at the IF input port are mixed with signals at the local oscillator ...
The MAX2660/MAX2661/MAX2663/MAX2671/MAX2673 miniature, low-cost, low-noise upconverters are designed for low-voltage operation and are ideal for use in portable consumer equipment. Signals at the IF input port are mixed with signals at the local oscillator ...
The MAX2660/MAX2661/MAX2663/MAX2671/MAX2673 miniature, low-cost, low-noise upconverters are designed for low-voltage operation and are ideal for use in portable consumer equipment. Signals at the IF input port are mixed with signals at the local oscillator ...
The MAX2307 is an integrated RF upconverter-driver optimized for the Japanese cellular frequency band. It can also be used for applications in the US cellular and ISM bands. Its low current consumption (15mA at -15dBm output) extends the average talk time.
The MAX2383 upconverter and PA driver IC
is designed for emerging ARIB (Japan) and
ETSI-UMTS (Europe) W-CDMA applications. The IC includes an upconversion mixer with variable gain control, an LO buffer, and a variable-gain PA driver for output power ...
The MAX2041 high-linearity passive upconverter or
downconverter mixer is designed to provide 7.4dB NF
and a 7.2dB conversion loss for an RF frequency range
of 1700MHz to 3000MHz to support UMTS/WCDMA,
DCS, PCS, and WiMAX base-station transmitter ...
The HMC216MS8(HMC216MS8E) is an ultra miniature double-balanced FET mixers in an 8 lead plastic surface mount package (MSOP). This MMIC mixer is constructed of switched GaAs FETs and novel planar transformer baluns on the chip. In addition to an LO drive of +3 ...
The HMC296MS8(HMC296MS8E) is a low LO drive, high IP3 double-balanced FET mixer in an 8 lead plastic surface mount MSOP package. This MMIC mixer is constructed of switched GaAs FETs and novel planar transformer baluns on the chip. The device can be used as an ...
The HMC304MS8(HMC304MS8E) is a passive high IP3 mixer in 8 lead plastic surface mount Mini Small Outline Package (MSOP). This miniature single balanced MMIC mixer is constructed of GaAs Schottky diodes and novel planar transformer baluns on the chip while not ...
The HMC350MS8(HMC350MS8E) is a miniature single balanced mixers in 8 lead plastic surface mount package. The passive GaAs schottky diode mixer implements planar on chip baluns and requires no external components. The mixer can be used as an upconverter, down ...
The HMC351S8(HMC351S8E) is a double balanced mixer in 8 lead plastic surface mount package. The passive GaAs schottky diode mixer implements planar on chip baluns and requires no external components. The mixer can be used as an upconverter, down converter, or ...
The HMC483MS8G(HMC483MS8GE) is a high dynamic range passive MMIC mixer with an integrated LO amplifier in plastic surface mount 8 lead Mini Small Outline Package (MSOP) covering 0.7 to 1.4 GHz. Excellent input IP3 performance of +33 dBm for down ...
The uPC8172TB is a silicon monolithic integrated circuit designed as frequency up-converter for wireless
transceiver transmitter stage. This IC is manufactured using NECs 30 GHz max. UHS0 (Ultra High Speed Process)
silicon bipolar process. ...
The uPC8187TB is a silicon monolithic integrated circuit designed as frequency up-converter for wireless
transceiver. This IC is higher operating frequency, lower distortion and higher conversion gain than conventional ...
The SKY73062 is a fully integrated up/downconversion mixer that
includes a Local Oscillator (LO) driver, an LO switch, and a high
linearity mixer. A low loss RF balun has also been included to
reduce design complications and lower system cost.
The ...
The SKY73069 is a fully integrated up/downconversion mixer that
includes a Local Oscillator (LO) driver, an LO switch, and a high
linearity mixer. A low loss RF balun has also been included to
reduce design complications and lower system cost.
The ...
The SKY73020 is a fully integrated diversity mixer that includes
Local Oscillator (LO) drivers, an LO switch, high linearity mixers,
and large dynamic range Intermediate Frequency (IF) amplifiers.
Low-loss RF baluns have also been included to reduce ...
The TriQuint TGC4402 is an upconverting mixer
MMIC design using TriQuints proven 0.25 um
3MI pHEMT process. The TGC4402 is designed
to support a variety of millimeter wave
applications including point-to-point digital radio
and K band Sat-Com. ...
The TGC4402-SM upconverting mixer is
designed to support a variety of millimeter wave
applications including point-to-point digital radio
and K band Sat-Com.
The TGC4402-SM provides 9 dB nominal
conversion loss across 18-26 GHz . Typical LO
input ...
The TriQuint TGC4405 is a multifunction chip. It is an
upconverter with RF output frequencies of 17 to 27
GHz. It contains a frequency doubler and local
oscillator (LO) amplifier, operating at LO Input
frequencies of 8 - 13 GHz. The part is designed ...
The TriQuint TGC4405-SM is an upconverter with RF
output frequencies of 17 to 27 GHz. It contains a
frequency doubler and local oscillator (LO) amplifier,
operating at LO input frequencies of 8 - 13 GHz. The
TGC4405-SM is in a compact 4 mm x 4 mm ...