The TUSB3200 integrated circuit (IC) is a universal serial bus (USB) peripheral interface device designed specifically for applications that require isochronous data streaming. Applications include digital speakers, which require the streaming of digital audio ...
The TUSB3200A integrated circuit (IC) is a universal serial bus (USB) peripheral interface device designed specifically for applications that require isochronous data streaming. Applications include digital speakers, which require the streaming of digital ...
The TUSB3210 is a USB-based controller targeted as a general-purpose MCU with GPIO. The TUSB3210 has 8K 8 RAM space for application development. In addition, the programmability of the TUSB3210 makes it flexible enough to use for various other general USB I/O ...
The TUSB3410 provides bridging between a USB port and an enhanced UART serial port. The TUSB3410 contains all the necessary logic to communicate with the host computer using the USB bus. It contains an 8052 microcontroller unit (MCU) with 16K bytes of RAM that ...
The TUSB6250 is a USB 2.0 HS-capable function controller with an integrated UTMI compliant PHY. The TUSB6250 is intended as a USB 2.0 to ATA/ATAPI bridge for storage devices using a standard ATA or ATAPI interface. The TUSB6250 is designed to utilize both the ...
The TUSB6010B is a USB 2.0 HS Dual Role USB Controller designed for seamless interface to an external Host processor through the NOR FLASH-like interface. The TUSB6010B can be used to enable the processor to implement any one of three genral types of USB ...
The TUSB6020 is a USB 2.0 high-speed, on-the-go (OTG) dual-role controller designed for a seamless interface to the VLYNQ serial interface, and is ideal for a wide range of applications. The USB OTG dual-role controller can operate either as a function ...
The PCM2900/2902 is Texas Instruments\' single-chip USB stereo audio codec with USB-compliant full-speed protocol controller and S/PDIF (only PCM2902). The USB protocol controller works with no software code, but the USB descriptors can be modified in some ...
The PCM2901/2903 is TI?s single-chip USB stereo audio codec with USB-compliant full-speed protocol controller and S/PDIF (only PCM2903). The USB protocol controller works with no software code, but the USB descriptors can be modified in some areas (for ...
The PCM2900/2902 is Texas Instruments\' single-chip USB stereo audio codec with USB-compliant full-speed protocol controller and S/PDIF (only PCM2902). The USB protocol controller works with no software code, but the USB descriptors can be modified in some ...
The PCM2901/2903 is TI?s single-chip USB stereo audio codec with USB-compliant full-speed protocol controller and S/PDIF (only PCM2903). The USB protocol controller works with no software code, but the USB descriptors can be modified in some areas (for ...
The PCM2904/2906 is Texas Instruments single-chip USB stereo audio codec with USB-compliant full-speed protocol controller and S/PDIF (PCM2906 only). The USB protocol controller works with no software code, but the USB descriptors can be modified in some areas ...
The PCM2904/2906 is Texas Instruments single-chip USB stereo audio codec with USB-compliant full-speed protocol controller and S/PDIF (PCM2906 only). The USB protocol controller works with no software code, but the USB descriptors can be modified in some areas ...
The TUSB1105 and TUSB1106 universal serial bus (USB) transceivers are compliant with the Universal Serial Bus Specification Rev. 2.0. These devices can transmit and receive serial data at both full-speed (12-Mbit/s) and low-speed (1.5-Mbit/s) data rates. The ...
The TUSB1105 and TUSB1106 universal serial bus (USB) transceivers are compliant with the Universal Serial Bus Specification Rev. 2.0. These devices can transmit and receive serial data at both full-speed (12-Mbit/s) and low-speed (1.5-Mbit/s) data rates. The ...
The SN65220 is a single transient voltage suppressor and the SN65240 and SN75240 are dual transient voltage suppressors designed to provide electrical noise transient protection to Universal Serial Bus (
59b
USB) 1.1 ports. Note that the input capacitance of ...
The SN65220 is a single transient voltage suppressor and the SN65240 and SN75240 are dual transient voltage suppressors designed to provide electrical noise transient protection to Universal Serial Bus (USB) 1.1 ports. Note that the input capacitance of the ...
The SN65220 is a single transient voltage suppressor and the SN65240 and SN75240 are dual transient voltage suppressors designed to provide electrical noise transient protection to Universal Serial Bus (USB) 1.1 ports. Note that the input capacitance of the ...
The TS3USB221 is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide ...
The TS3USB30 is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide ...
The TS3USB31 is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide ...
The TUSB2036 hub is a 3.3-V CMOS device that provides up to three downstream ports in compliance with the USB version 1.1 specification. Because this device is implemented with a digital state machine instead of a microcontroller, no firmware programming is ...
The TUSB2046B is a 3.3-V CMOS hub device that provides one upstream port and four downstream ports in compliance with the Universal Serial Bus (USB) specification as a full-speed hub. Because this device is implemented with a digital state machine instead of a ...
The TUSB2077A hub is a 3.3-V CMOS device that provides up to seven downstream ports in compliance with the USB version 1.1 specification. Because this device is implemented with a digital state machine instead of a microcontroller, no software programming is ...
The TUSB2136 is an integrated universal serial bus (USB) hub with a general-purpose 8052 microcontroller that can be used for various USB controller applications. The TUSB2136 has 8K 8 RAM space for application development. Using a 12-MHz crystal, the onboard ...
This controller TUSB5052 provides bridging between the USB and the dual-enhanced UARTs. This device contains all the necessary logic to communicate with the host computer using the USB bus. In addition to the USB host interface, the device contains a 5-port ...
The USB1T11A is a one chip generic USB transceiver. It is designed to allow 5.0V or 3.3V programmable and standard logic to interface with the physical layer of the Universal Serial Bus. It is capable of transmitting and receiving serial data at both full ...
This chip USB1T1103 provides a USB Transceiver functionality with a voltage regulator that is compliant to USB Specification Rev 2.0. this integrated 5V to 3.3V regulator allows interfacing of USB Application specific devices with supply voltages ranging from ...
The USB1T1105A is an Universal Serial Bus Specification Rev 2.0 compliant transceiver. The device provides an USB interface for Full-Speed (12Mbit/s) USB applications. The USB1T1105A provides excellent flexibility, allowing differential and single ended inputs ...
The USB1T20 is a generic USB 2.0 compliant transceiver. Using a single voltage supply, the USB1T20 provides an ideal USB interface solution for any electronic device able to supply 3.0V to 3.6V. It is designed to allow 5.0V or 3.3V programmable and standard ...
This chip USB1T1102 provides a USB Transceiver functionality with a voltage regulator that is compliant to USB Specification Rev 2.0. this integrated 5V to 3.3V regulator allows interfacing of USB Application specific devices with supply voltages ranging from ...
The ISP1102 Universal Serial Bus (USB) transceiver is fully compliant with Universal
Serial Bus Specification Rev. 2.0. The ISP1102 can transmit and receive USB data at
full-speed (12 Mbit/s).
The transceiver allows USB Application-Specific Integrated ...
The ISP1105/1106 range of Universal Serial Bus (USB) transceivers are compliant
with the Universal Serial Bus Specification Rev. 2.0. They can transmit and receive
serial data at both full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates. ...
The ISP1362 is a single-chip Universal Serial Bus (USB) On-The-Go (OTG) controller
integrated with the advanced NXP Slave Host Controller and the NXP ISP1181B
Peripheral Controller. The USB OTG Controller is compliant with Ref. 1 \"On-The-Go
Supplement to ...
The ISP1520 is a stand-alone Universal Serial Bus (USB) hub controller IC that complies
with Universal Serial Bus Specification Rev. 2.0. It supports data transfer at high-speed
(480 Mbit/s), full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s).
The upstream ...
The ISP1521 is a stand-alone Universal Serial Bus (USB) hub controller IC that complies
with Universal Serial Bus Specification Rev. 2.0. It supports data transfer at high-speed
(480 Mbit/s), full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s).
The upstream ...
The ISP1561 is a Peripheral Component Interconnect (PCI)-based, single-chip Universal
Serial Bus (USB) Host Controller. It integrates two Original USB Open Host Controller
Interface (OHCI) cores, one Hi-Speed USB Enhanced Host Controller Interface ...
The PDIUSBD12 is a cost- and feature-optimized USB peripheral controller. It is normally
used in microcontroller-based systems and communicates with the system microcontroller
over the high-speed general-purpose parallel interface. It also supports local ...
The STOTG04 is a USB On-The-Go full-speed
transceiver. It provides complete physical layer
(PHY) solution for any USB-OTG device. It
contains V charge pump and comparators, ID
BUS
line detector and interrupt generator, and the USB
differential driver ...
The STOTG04ES is a USB On-The-Go full-speed
transceiver. It provides complete physical layer
solution for any USB-OTG device. It contains
V charge pump and comparators, ID line
BUS
detector and interrupt generator, and the USB
differential driver and ...
The STUSB02E is a single chip USB transceiver
that supports both full-speed (12Mbps) and low-
speed (1.5Mbps) operation. It has an integrated
5V to 3.3V regulator which allows direct powering
from the V . The transceiver has an integrated
BUS
voltage ...
The STUSB03E is a single chip transceiver that
complies with the physical layer specifications of
the Universal Serial Bus (USB) v2.0 standard. It
has an integrated 5V to 3.3V regulator which
allows direct powering from the V . The
BUS ...
The STULPI01 is a high-speed ULPI (UTMI+ Low
Pin Interface), USB OTG transceiver which
provides complete physical layer solution for any
high speed USB host, device or OTG dual role
core. It allows USB ASICs to interface with the
physical layer of ...
USB C51-based Microcontroller with 64K Bytes Flash, 2304 bytes RAM, 4 USB Endpoints, SPI, UART, IDE, TWI, MultiMediaCard, DataFlash, I2S, 10-bit ADC. The AT89C5132 is a mass storage device controlling data exchange between various
Flash modules, HDD and ...
AT89C5130A-M
AT89C5131A-M is a high-performance Flash version of the 80C51 single-chip 8-bit micro-
controllers with full speed USB functions.
AT89C5130A-M
AT89C5131A-M features a full-speed USB module compatible with the USB specifications
Version 1.1 ...
AT89C5131A-L USB
Microcontrollers , This document describes the USB bootloader functionalities as well as the USB proto-
col to efficiently perform operations on the on-chip Flash (EEPROM) memories.
Additional information on the AT89C5131A product can be ...
AT83C5134
AT83C5135
AT83C5136 are high performance ROM versions
of the 80C51 single-chip 8-bit microcontrollers with full
speed USB functions.
AT83C5134
AT83C5135
AT83C5136 is pin compatible with AT89C5130A 16-
Kbytes In-System Programmable Flash ...
The AT90USB82/AT90USB162 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By exe-
cuting powerful instructions in a single clock cycle, the AT90USB82/AT90USB162 achieves throughputs approaching 1 MIPS per
MHz allowing ...
AT90USB162 8-bit AVR Microcontroller With 8K Bytes Of ISP Flash And USB Controller ,The AT90USB82/AT90USB162 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By exe-
cuting powerful instructions in a single clock cycle, ...
ATmega32U4 8-bit AVR Microcontroller with 32K Bytes of ISP Flash and USB Controller ,ATmega32U4 The ATmega32U4 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced
RISC architecture. By executing powerful instructions in a single clock ...
The AT43301 is a 5-port USB hub chip supporting one upstream and four down-
stream ports. The AT43301 connects to an upstream hub or host/root hub via Port0,
while the other ports connect to external downstream USB devices. The hub re-trans-
mits the USB ...
The AT43312A is a 5 port USB hub chip supporting one upstream and four down-
stream ports. The AT43312A connects to an upstream hub or Host/Root Hub via Port0
and the other ports connect to external downstream USB devices. The hub re-trans-
mits the USB ...
The Atmel AT43USB351M is a USB AVR-based microcontroller that is configurable as
a low-speed or full-speed USB device. Its program memory is a 24-Kbyte mask pro-
grammable ROM and its data memory is 1-Kbyte SRAM. The on-chip peripherals
consists of 19 ...
The Atmel AT43USB355 is an 8-bit microcontroller based on the AVR RISC architec-
ture. By executing powerful instructions in a single clock cycle, the AT43USB355
achieves throughputs approaching 12 MIPS. The AVR core combines a rich instruc-
tion set with ...
The Atmel AT43USB326 is an 8-bit microcontroller based on the AVR RISC architec
ture. By executing powerful instructions in a single clock cycle, the AT43USB326
achieves throughputs approaching 12 MIPS. The AVR core combines a rich instruc
tion set with 32 ...
The Atmel AT43USB353M is an 8-bit microcontroller based on the AVR RISC arch
tecture. By executing powerful instructions in a single clock cycle, the AT43USB353
achieves throughputs approaching 24 MIPS. The AVR core combines a rich instruc
tion set with 32 ...
The Atmel AT43USB325 is an 8-bit microcontroller based on the AVR RISC architec-
ture. By executing powerful instructions in a single clock cycle, the AT43USB325
achieves throughputs approaching 12 MIPS. The AVR core combines a rich instruc-
tion set with ...
The AT43USB380 is a straightforward upgrade of the AT43USB370 Host/Function
Processor to support the USB 2.0 On-The-Go (OTG) specification. It can operate
either as a single-chip Host/Function Processor or if used in conjunction with an exter-
nal Atmel ...
The AT76C713 is a low-power, high performing USB 2.0 full-speed microcontroller pro-
viding advanced features for USB peripherals. It combines a number of functions
required in such a device, including the following: ...
The DS2490 is a bridge chip that enables communication between a USB host system and a 1-Wire bus. It provides regular, overdrive, and flexible 1-Wire communication speeds and a full-speed 12Mbps connection to USBUSB vendor-specific commands defined in this ...
The MAX3453E, MAX3454E, MAX3455E, MAX3456E 15kV ESD-protected USB-compliant
transceivers interface low-voltage ASICs with
USB devices. The devices fully comply with USB 1.1
and USB 2.0 when operating at full (12Mbps) and low
(1.5Mbps) speeds. The ...
The MAX3453E, MAX3454E, MAX3455E, MAX3456E 15kV ESD-protected USB-compliant
transceivers interface low-voltage ASICs with
USB devices. The devices fully comply with USB 1.1
and USB 2.0 when operating at full (12Mbps) and low
(1.5Mbps) speeds. The ...
The MAX3453E, MAX3454E, MAX3455E, MAX3456E 15kV ESD-protected USB-compliant
transceivers interface low-voltage ASICs with
USB devices. The devices fully comply with USB 1.1
and USB 2.0 when operating at full (12Mbps) and low
(1.5Mbps) speeds. The ...
The MAX3453E, MAX3454E, MAX3455E, MAX3456E 15kV ESD-protected USB-compliant
transceivers interface low-voltage ASICs with
USB devices. The devices fully comply with USB 1.1
and USB 2.0 when operating at full (12Mbps) and low
(1.5Mbps) speeds. The ...
The MAX3344E/MAX3345E USB transceivers convert logic-level signals to USB signals, and USB signals to logic-level signals. An internal 1.5k USB pullup resistor supports full-speed (12Mbps) USB operation. The MAX3344E/MAX3345E provide built-in 15kV ...
The MAX3344E/MAX3345E USB transceivers convert logic-level signals to USB signals, and USB signals to logic-level signals. An internal 1.5k USB pullup resistor supports full-speed (12Mbps) USB operation. The MAX3344E/MAX3345E provide built-in 15kV ...
The MAX3346E bidirectional transceiver converts logic-level signals to USB signals, and USB signals to logic-level signals. The MAX3346E includes the 1.5k USB pullup resistor internally, and supports both full-speed (12Mbps) and low-speed (1.5Mbps) USB ...
The MAX3301E/MAX3302E fully integrated USB On-the-Go (OTG) transceivers and charge pumps allow mobile devices such as PDAs, cellular phones, and digital cameras to interface directly with USB peripherals and each other without the need of a host PC. Use the ...
The MAX3301E/MAX3302E fully integrated USB On-the-Go (OTG) transceivers and charge pumps allow mobile devices such as PDAs, cellular phones, and digital cameras to interface directly with USB peripherals and each other without the need of a host PC. Use the ...
The MAX3349E 15kV ESD-protected, USB transceiver provides a full-speed USB interface to a lower voltage microprocessor or ASIC. The device supports enumeration, suspend, and VBUS detection. A special UART multiplexing mode routes external UART signals (Rx and ...
The MAX3420E contains the digital logic and analog
circuitry necessary to implement a full-speed USB
peripheral compliant to USB specification rev 2.0. A
built-in full-speed transceiver features 15kV ESD protection
and programmable USB connect and ...
The MAX13481E/MAX13482E/MAX13483E 15kV ESD-protected
USB-compliant transceivers interface low-voltage
ASICs with USB devices. The transceivers fully
comply to USB 2.0 when operating at full-speed
(12Mbps). The transceivers also operate with VL as low
as ...
The MAX13481E/MAX13482E/MAX13483E 15kV ESD-protected
USB-compliant transceivers interface low-voltage
ASICs with USB devices. The transceivers fully
comply to USB 2.0 when operating at full-speed
(12Mbps). The transceivers also operate with VL as low
as ...
The MAX13481E/MAX13482E/MAX13483E 15kV ESD-protected
USB-compliant transceivers interface low-voltage
ASICs with USB devices. The transceivers fully
comply to USB 2.0 when operating at full-speed
(12Mbps). The transceivers also operate with VL as low
as ...
The MAX3421E USB peripheral/host controller contains the digital logic and analog circuitry necessary to implement a full-speed USB peripheral or a full-/low-speed host compliant to USB specification rev 2.0. A built-in transceiver features 15kV ESD protection ...
The MAX3450E/MAX3451E/MAX3452E USB-compliant
transceivers interface low-voltage ASICs with USB
devices. The devices fully comply with USB 1.1 and
USB 2.0 when operating at full (12Mbps) and low
(1.5Mbps) speeds. The MAX3450E/MAX3451E/
MAX3452E operate ...
The MAX3450E/MAX3451E/MAX3452E USB-compliant
transceivers interface low-voltage ASICs with USB
devices. The devices fully comply with USB 1.1 and
USB 2.0 when operating at full (12Mbps) and low
(1.5Mbps) speeds. The MAX3450E/MAX3451E/
MAX3452E operate ...
The MAX3450E/MAX3451E/MAX3452E USB-compliant
transceivers interface low-voltage ASICs with USB
devices. The devices fully comply with USB 1.1 and
USB 2.0 when operating at full (12Mbps) and low
(1.5Mbps) speeds. The MAX3450E/MAX3451E/
MAX3452E operate ...
The MIC2550 is a single-chip transceiver that complies with
the physical layer specifications for Universal Serial Bus
(USB).
The MIC2550 supports full-speed (12Mbps) dual supply
voltage operation (patent pending) and low-speed (1.5Mbps)
operation. ...
The MIC2550A is a single-chip transceiver that complies with
the physical layer specifications for Universal Serial Bus
(USB).
The MIC2550A supports full-speed (12Mbps) and low-speed
(1.5Mbps) operation and introduces superior edge rate con-
trol to ...
The MIC2551 is a single chip transceiver that complies with
the physical layer specifications of the Universal Serial Bus
(USB) 2.0. It supports both full speed (12Mbps) and low
speed (1.5Mbps) operation. It is also designed to operate
down to 1.6V in ...
The MIC2551A is a single chip transceiver that complies with
the physical layer specifications of the Universal Serial Bus
(USB) 2.0. It supports both full speed (12Mbps) and low
speed (1.5Mbps) operation and introduces superior edge
rate control, ...
MIC2555 is a USB On-The-Go (OTG) transceiver
designed to enable intelligent self-powered devices to
communicate on a peer-to-peer basis with other USB and
USB OTG enabled devices. Designed to perform as a
PHY for USB Serial Interface Engines (SIE), ...
The CY7C66013C and CY7C66113C are compound devices
with a full speed USB microcontroller in combination with a USB
hub. Each device is well suited for combination peripheral
functions with hubs such as a keyboard hub function. The 8-bit
one time ...
Cypress Semiconductor Corporations (Cypresss) EZ-U
FX2LP ( CY7C68013A, CY7C68014A
CY7C68015A, CY7C68016A is a low power version of the
EZ-USB FX2, (CY7C68013), which is a highly integrated, low
power USB 2.0 microcontroller. By integrating the USB 2.0 ...
EZ-USB FX1 (CY7C64713) is a full speed, highly integrated,
USB microcontroller. By integrating the USB transceiver, Serial
Interface Engine (SIE), enhanced 8051 microcontroller, and a
programmable peripheral interface in a single chip, Cypress has
created ...
The CY7C65113C device is a one-time programmable 8-bit microcontroller with a built-in 12-Mbps USB hub that supports up to
four downstream ports. The microcontroller instruction set has been optimized specifically for USB operations, although ...
The CY7C64013C and CY7C64113C are 8-bit One Time Programmable microcontrollers that are designed for full-speed USB
applications. The instruction set has been optimized specifically for USB operations, although the microcontrollers can be used
for a variety ...
The enCoRe V family of devices are designed to replace multiple
traditional full-speed USB microcontroller system components
with one, low cost single-chip programmable component.
Communication peripherals (I2C/SPI), a fast CPU, Flash
program memory, SRAM ...
Cypress Semiconductor Corporations MoBL-US, FX2LP18
(CY7C68053) is a low-voltage (1.8 volt) version of the EZ-
USB FX2LP (CY7C68013A), which is a highly integrated,
low-power USB 2.0 microcontroller. By integrating the USB 2.0
transceiver, serial ...
EZ-Host, (CY7C67300) is Cypress Semiconductors firs
full-speed, low-cost multiport host/peripheral controller.
EZ-Host is designed to easily interface to most high-perfor-
mance CPUs to add USB host functionality. EZ-Host has its
own 16-bit RISC processor ...
The SL811HS is an Embedded USB Host/Slave Controller
capable of communicating in either full speed or low speed.
The SL811HS interfaces to devices such as microprocessors,
microcontrollers, DSPs, or directly to a variety of buses such
as ISA, PCMCIA, and ...
EZ-USB HX2LP, is Cypress next generation family of hig
performance, low power USB 2.0 hub controllers. HX2LP is an
ultra low power single chip USB 2.0 hub controller with integrated
upstream and downstream transceivers, a USB Serial Interface
Engine (SIE), ...
1. CY7C65630: 4-port/single transaction translator
This device option is for ultra low power applications that re-
quire four downstream ports. All four ports share a single
transaction translator. The CY7C65630 is available in a 56
QFN and is also ...
The EZ-USB AT2LP, (CY7C68300C/CY7C68301C and
CY7C68320C/CY7C68321C) implements a fixed-function
bridge between one USB port and one or two ATA- or
ATAPI-based mass storage device ports. This bridge adheres
to the Mass Storage Class Bulk-Only Transport ...
EZ-OTG, (CY7C67200) is Cypress Semiconductors firs
USB On-The-Go (OTG) host/peripheral controller. EZ-OTG is
designed to easily interface to most high-performance CPUs
to add USB host functionality. EZ-OTG has its own 16-bit RISC
processor to act as a ...
The Cypress MoBL-USB, TX2 is a Universal Serial Bus
(USB) specification revision 2.0 transceiver, serial/deseri-
alizer, to a parallel interface of either 16 bits at 30 MHz or eight
bits at 60 MHz. The MoBL-USB TX2 provides a high-speed
physical layer ...
Being a fixed-function USB device, there is no risk or added
engineering effort required for firmware development. The
developer does not need to write any firmware for their design.
The CY4602 Tetrahub USB 2.0 4-port Hub Reference Design
Kit provides all ...